Arris nvg468mq manual pdf

Arris nvg468mq manual pdf DEFAULT

FiOS by Frontier

®

Router and

Optional MoCA

Adapter

Arris NVG468MQ

Arris MEB1100

QUICK SETUP GUIDE

STEP 1

Check your Config

Your new FiOS

by Frontier

®

MoCA from the Optical Network Terminal (ONT) to your FiOS Router. Check your

packaging contents.

If you have a MoCA Adapter, make sure you have the following:

NEXT:

Proceed to Step 2

If you don't have the MoCA adapter, check your packaging contents and make sure you

have the following:

NEXT:

Proceed to Step 2

Data service could be configured using Ethernet or

®

MoCA Adapter (1)

FiOS Router (1)

Coax Cable (3) Ethernet Cable (1) USB Cable (1)

Power Adapter (1)

FiOS Router (1)

®

Power Adapter (1)

Splitter (1)

Coax Cable (1)

Ethernet Cable (1)

loading

  Related Manuals for Frontier FiOS Arris NVG468MQ

  Summary of Contents for Frontier FiOS Arris NVG468MQ

This manual is also suitable for:

Fios arris meb1100
ManualsLib

2012-2021 ManualsLib

Sours: https://www.manualslib.com/manual/1414037/Frontier-Fios-Arris-Nvg468mq.html

ARRIS Group NVG4XXQ Ethernet and FTTH Gateway User Manual ARRIS NVG46MQ Quick Start Guide

Part Number: 599527-001-00

Declaration of Conformance

WARNING:This is a Class B product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate

measures. Adequate measures include increasing the physical distance between this product and other electrical devices. Changes or modifications to this unit not

expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

United States:This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.This device may not cause harmful interference, and

2.This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the device.

•Increase the distance between the equipment being interfered with and the device.

•Connect the device to an outlet on a circuit different from the outlet to which the equipment being interfered with is connected.

•Consult the retailer or an experienced radio/TV technician for help.

United States:This device complies with 47 CFR Part 68 of the FCC Rules. Operation is subject to the following four conditions:

1.The Federal Communications Commission (FCC) has established Rules which permit this device to be directly connected to the telephone network. Standardized

jacks are used for these connections. This equipment should not be used on party lines or coin phones.

2.If this device is malfunctioning, it may also be causing harm to the telephone network; this device should be disconnected until the source of the problem can be

determined and until repair has been made. If this is not done, the telephone company may temporarily disconnect service.

3.The telephone company may make changes in its technical operations and procedures; if such changes affect the compatibility or use of this device, the telephone

company is required to give adequate notice of the changes. You will be advised of your right to file a complaint with the FCC.

4.If the telephone company requests information on what equipment is connected to their lines, inform them of:

•The telephone number to which this unit is connected.

•The ringer equivalence number. [0.XB] (Indicated on the label)

•The USOC jack required. [RJ11C]

•The FCC Registration Number. [XXXUSA-XXXXX-XX-E] (Indicated on the label)

The Ringer Equivalence Number (REN) is used to determine how many devices can be connected to your telephone line. In most areas, the sum of the REN's of all

devices on any one line should not exceed five (5.0). If too many devices are attached, they may not ring properly.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operations within the 5.15 ~ 5.25 GHz band are restricted to

indoor use only.

Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits as set forth for an uncontrolled environment. This equipment should be

installed and operated maintaining a minimum distance of 27 cm between the device and your body.

Service Requirements: In the event of equipment malfunction, if under warranty, we will exchange a product deemed defective. Under FCC rules, no customer is

authorized to repair this equipment. This restriction applies regardless of whether the equipment is in or out of warranty.

Technical Support for Hardware Products:

Customers inside North America: 888-944-4357 (888-944-HELP)

Customers outside North America: 1-215-323-2345

For Spanish language support: 1-215-323-2346

All ARRIS products are furnished under a license agreement included with the product. If you are unable to locate a copy of the license agreement, please contact ARRIS.

IMPORTANT: This product was tested for FCC compliance under conditions that included the use of shielded cables and connectors between system components.

Changes or modifications to this product not authorized by the manufacturer could void your authority to operate the equipment.

Copyright

©ARRIS Enterprises, LLC, 2016 All rights reserved. No part of this publication may be reproduced in any form or by any means or used to make any derivative work (such

as translation, transformation, or adaptation) without written permission from ARRIS Enterprises, Inc. (“ARRIS”). ARRIS reserves the right to revise this publication and to

make changes in content from time to time without obligation on the part of ARRIS to provide notification of such revision or change.

ARRIS and the ARRIS logo are all trademarks of ARRIS Enterprises, Inc. Other trademarks and trade names may be used in this document to refer to either the entities

claiming the marks and the names of their products. ARRIS disclaims proprietary interest in the marks and names of others.

ARRIS provides this guide without warranty of any kind, implied or expressed, including, but not limited to, the implied warranties of merchantability and fitness for a

particular purpose. ARRIS may make improvements or changes in the product(s) described in this manual at any time.

The capabilities, system requirements and/or compatibility with third-party products described herein are subject to change without notice.

EXCEPT AS INDICATED IN THE APPLICABLE SYSTEM PURCHASE AGREEMENT, THE SYSTEM, DOCUMENTATION AND SERVICES ARE PROVIDED “AS IS”, AS AVAILABLE,

WITHOUT WARRANTY OF ANY KIND. ARRIS GROUP, INC. (“ARRIS”) DOES NOT WARRANT THAT THE SYSTEM WILL MEET CUSTOMER'S REQUIREMENTS, OR THAT THEIR

OPERATION WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT ANY ERRORS CAN OR WILL BE FIXED. ARRIS HEREBY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR

IMPLIED, ORAL OR WRITTEN, WITH RESPECT TO THE SYSTEM AND SERVICES INCLUDING, WITHOUT LIMITATION, ALL IMPLIED WARRANTIES OF TITLE, NON-

INFRINGEMENT, INTEGRATION, MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE AND ALL WARRANTIES ARISING FROM ANY COURSE OF DEALING OR

PERFORMANCE OR USAGE OF TRADE. EXCEPT AS INDICATED IN THE APPLICABLE SYSTEM PURCHASE AGREEMENT, ARRIS SHALL NOT BE LIABLE CONCERNING THE

SYSTEM OR SUBJECT MATTER OF THIS DOCUMENTATION, REGARDLESS OF THE FORM OF ANY CLAIM OR ACTION (WHETHER IN CONTRACT, NEGLIGENCE, STRICT

LIABILITY OR OTHERWISE), FOR ANY (A) MATTER BEYOND ITS REASONABLE CONTROL, (B) LOSS OR INACCURACY OF DATA, LOSS OR INTERRUPTION OF USE, OR COST OF

PROCURING SUBSTITUTE TECHNOLOGY, GOODS OR SERVICES, (C) INDIRECT, PUNITIVE, INCIDENTAL, RELIANCE, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES

INCLUDING, BUT NOT LIMITED TO, LOSS OF BUSINESS, REVENUES, PROFITS OR GOODWILL, OR (D) DIRECT DAMAGES, IN THE AGGREGATE, IN EXCESS OF THE FEES PAID

TO IT HEREUNDER FOR THE SYSTEM OR SERVICE GIVING RISE TO SUCH DAMAGES DURING THE 12-MONTH PERIOD PRIOR TO THE DATE THE CAUSE OF ACTION AROSE,

EVEN IF COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THESE LIMITATIONS ARE INDEPENDENT FROM ALL OTHER PROVISIONS OF THIS

AGREEMENT AND SHALL APPLY NOTWITHSTANDING THE FAILURE OF ANY REMEDY PROVIDED HEREIN.

NVG468MQ Ethernet and FTTH Gateway Quick Start Guide

Introduction

Use this Quick Start Guide to install, configure, and perform basic troubleshooting for the ARRIS™ NVG468MQ Ethernet and FTTH Gateway.

Power Supply Installation

Connect the power supply cord to the power connection on the gateway. Plug the power supply into an appropriate electrical outlet.

WARNING:The power supply must be connected to an outlet with a protective earth connection. Do not defeat the protective earth connection.

Product Ventilation

The gateway is intended for residential use. Position the gateway in an upright vertical position and locate it where temperatures remain within a range

of 32° – 104°F (0° – 40°C) and where heat from the unit itself is not trapped, requires at least two inches (2”) of clearance on all sides except bottom.

Gateway Positioning, Status Indicator Lights and Port Configuration

Proper positioning of the gateway is essential for proper cooling. Colored LEDs on the gateway indicate the status of various port activity.

LED Status

Power

Solid Green = The device is powered.

Flashing Green = The device is booting.

Solid Red = Boot failure.

Flashing Red = Detecting Factory Reset (press and hold the recessed Reset Switch for 1 second to reboot the device and for 10 or

more seconds to trigger the factory reset).

Internet

Solid Blue = Broadband Internet connection is active.

Solid Red = No IP address or authentication failed.

Off = No active Broadband connection.

Broadband Solid Green = Ethernet WAN connection is active.

Solid Red = No Broadband Ethernet WAN signal on the line.

MoCA LAN

Solid Green = MoCA LAN connection is active.

Flashing Green = MoCA LAN is detecting, connecting and configuring.

Solid Red = No MoCA LAN signal on the line.

Off = MoCA is disabled.

Wi-Fi

Solid Green = Wireless enabled (either radio).

Flashing Yellow = WiFi Protected Setup (WPS) is active.

•Slow flash = less than 3 sec WPS push for 5GHz SSID user pairing. Can be changed to 2.4GHz.

•Fast flash = 3 sec or longer WPS push for 5GHz Video SSID pairing.

Flashing Red = WPS timeout or conflict.

Solid Red = Wireless network failure.

Off = Wireless disabled (both radios).

LAN/WAN Ethernet

LEDs on rear panel RJ45 ports

Solid Green = Port is active.

Flashing Green = Traffic passing on the line.

Off = Port not active.

Phone Line

Solid Green = All VoIP voice lines are registered and active.

Flashing Green = A voice line is ringing or off-hook.

Solid Yellow = Both lines of a two line system are provisionedwith one unregistered.

Solid Red = All provisioned VoIP voice lines are provisioned but but not SIP registered.

Off = VoIP is not provisioned, or the gateway power is off.

Power

Wi-Fi

Broadband

Power Connection

Power Button

ONT Broadband Port

LAN Ethernet Ports With LED Support

USB Port

Phone Jack

Phone

Reset Switch (recessed)

Do Not Position

Horizontally

5cm/2”

Minimum Spacing

5cm/2”

Internet

MoCA

WPS

MoCA Cable Connector

Sours: https://usermanual.wiki/ARRIS-Group/NVG4XXQ.Users-Manual-NVG468MQ-pdf/html
  1. 99 maxima fuel pump
  2. Zelda dungeon 4 map
  3. Www craigslist com waukesha
  4. Project qt mod apk 10 0

Users Manual (NVG468MQ).pdf

Part Number:  599527-001-00Powering and Initial CablingPress the power button on the back of the gateway. The Power indicator will light GREEN to indicate that the gateway is powered correctly. Under normal operation, while the gateway is powering up, LED status is as follows:• Internet will light solid BLUE to indicate Internet connection is active, solid RED when there is no IP address, and off when there is no Broadband connection.• Broadband, Ethernet, Wireless, and Phone indicators will be off.• Ethernet and Wireless indicators will light GREEN to indicate that the Ethernet connection and Wireless service are active.• Broadband indicator will initially flash GREEN, and upon service connectivity, it will light solid GREEN.• Phone indicator will light GREEN after the Broadband indicator lights GREEN to indicate that digital phone service is active.NOTE:  ATTENTION CATV System Installers. Review section 820-93 of the National Electric Code for proper equipment grounding requirements. Section 820-93 specifies the Coaxial cable shield must be connected to the building grounding system as close to the point of cable entry as practical. NOTE: On initial setup, it may take several minutes to achieve service connectivity. ONT Broadband: Use the following procedure to connect the gateway to Optical Network Termination (ONT) Ethernet.1. Connect an Ethernet cable to the ONT Broadband port on the back of the gateway.2. Connect the other end of the Ethernet cable to the incoming ONT connection.MoCA: Use the following procedure to connect the gateway to a Cable line.1. Connect a F-Connector terminated coaxial cable to the Cable Line terminal on the back of the gateway.2. Connect the other end of the coaxial cable from the gateway to the cable service connection.Digital Phone Service: Use the following procedure to connect the gateway to a digital phone line.1. Connect the supplied RJ11 terminated phone cable to the Phone port on the back of the gateway.2. Connect the phone cable to a phone or fax machine. NOTE: Use a RJ-14 to RJ-11 splitter to connect two phone lines.  Ethernet: Use the following procedure to make an Ethernet connection on the gateway.1. Connect the supplied RJ45 terminated Ethernet cable to one of the Ethernet ports on the back of the gateway.2. Connect the Ethernet cable to the Ethernet port on a local computer.Access the Web Management Interface1. Open a web browser, such as Firefox, Chrome, or Microsoft Internet Explorer, from the computer connected to the gateway.2. Type the following address in the address bar of the browser to open the Access Code Required Screen: http://192.168.254.254 Access the Web Management Configuration Pages NOTE: When applicable, select the appropriate language button in the lower right corner of the Access Code Required Screen to continue in the selected language. To access the Web Management configuration pages:1. Provide the Device Access Code, a unique code printed on a label on the base of the gateway.2. Select Continue.Broadband Configure InterfaceThe NVG468MQ has Broadband Configuration screen for initial configuration. Use the Broadband Configuration screen to configure the gateway to use DHCP Client or PPPoE for the broadband IP interface:• If the proper connection type is not determined, use the DHCP option from the pulldown menu and select Finish. • If it is known that PPPoE is required, then select it and enter the user name and password, then select Finish. When the connection is successful, the Home Screen opens. • If there is a failure in the connection, the notice “WAN connection was not successful - Please reenter your broadband configuration” appears on the Broadband Configuration screen.Main Page The Main page provides an overview of the connection and home network status. From this screen, other detailed status and configuration screens can be accessed including the following:• Main — network status/configuration• Wireless — network status/configuration, including security settings• Network — status of all devices in the LAN Host Discovery table• Firewall — status/configuration• Advanced — advanced settings and configuration, including the Reboot (Factory Reset) options• Status — system status/configurationAdd a Wireless Device to the GatewayOn the wireless device, use the Wireless setup option to find the available wireless network names. The Wi-Fi Network Name for the gateway is printed on the bottom label along with the Wi-Fi Password. NOTE: Optionally, WiFi Protected Setup (WPS) can be used to allow wireless devices with WPS support to join by pressing the WPS button on the front panel and following the wireless device instructions provided. The WiFi Configure screen provides access to enable or disable the WPS, and can also be used to change the default wireless network name and password.PasswordDevice Access Code LocationRequired Page NOTE: The terms Device Access Code and Password are sometimes used interchangeably. Main Page
Part Number:  599527-001-00Declaration of ConformanceWARNING:  This is a Class B product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures. Adequate measures include increasing the physical distance between this product and other electrical devices. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.United States: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:1. This device may not cause harmful interference, and2. This device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the device.• Increase the distance between the equipment being interfered with and the device.• Connect the device to an outlet on a circuit different from the outlet to which the equipment being interfered with is connected.• Consult the retailer or an experienced radio/TV technician for help.United States: This device complies with 47 CFR Part 68 of the FCC Rules. Operation is subject to the following four conditions:1. The Federal Communications Commission (FCC) has established Rules which permit this device to be directly connected to the telephone network. Standardized jacks are used for these connections. This equipment should not be used on party lines or coin phones.2. If this device is malfunctioning, it may also be causing harm to the telephone network; this device should be disconnected until the source of the problem can be determined and until repair has been made. If this is not done, the telephone company may temporarily disconnect service.3. The telephone company may make changes in its technical operations and procedures; if such changes affect the compatibility or use of this device, the telephone company is required to give adequate notice of the changes. You will be advised of your right to file a complaint with the FCC.4. If the telephone company requests information on what equipment is connected to their lines, inform them of:• The telephone number to which this unit is connected.• The ringer equivalence number. [0.XB] (Indicated on the label)• The USOC jack required. [RJ11C]• The FCC Registration Number. [XXXUSA-XXXXX-XX-E] (Indicated on the label)The Ringer Equivalence Number (REN) is used to determine how many devices can be connected to your telephone line. In most areas, the sum of the REN's of all devices on any one line should not exceed five (5.0). If too many devices are attached, they may not ring properly.FCC Caution:  Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operations within the 5.15 ~ 5.25 GHz band are restricted to indoor use only. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits as set forth for an uncontrolled environment. This equipment should be installed and operated maintaining a minimum distance of 27 cm between the device and your body.Service Requirements: In the event of equipment malfunction, if under warranty, we will exchange a product deemed defective. Under FCC rules, no customer is authorized to repair this equipment. This restriction applies regardless of whether the equipment is in or out of warranty. Technical Support for Hardware Products:Customers inside North America: 888-944-4357 (888-944-HELP)Customers outside North America: 1-215-323-2345For Spanish language support: 1-215-323-2346All ARRIS products are furnished under a license agreement included with the product. If you are unable to locate a copy of the license agreement, please contact ARRIS.IMPORTANT: This product was tested for FCC compliance under conditions that included the use of shielded cables and connectors between system components. Changes or modifications to this product not authorized by the manufacturer could void your authority to operate the equipment.Copyright©ARRIS Enterprises, LLC, 2016 All rights reserved. No part of this publication may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from ARRIS Enterprises, Inc. (“ARRIS”). ARRIS reserves the right to revise this publication and to make changes in content from time to time without obligation on the part of ARRIS to provide notification of such revision or change. ARRIS and the ARRIS logo are all trademarks of ARRIS Enterprises, Inc. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and the names of their products. ARRIS disclaims proprietary interest in the marks and names of others.ARRIS provides this guide without warranty of any kind, implied or expressed, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. ARRIS may make improvements or changes in the product(s) described in this manual at any time. The capabilities, system requirements and/or compatibility with third-party products described herein are subject to change without notice.EXCEPT AS INDICATED IN THE APPLICABLE SYSTEM PURCHASE AGREEMENT, THE SYSTEM, DOCUMENTATION AND SERVICES ARE PROVIDED “AS IS”, AS AVAILABLE, WITHOUT WARRANTY OF ANY KIND. ARRIS GROUP, INC. (“ARRIS”) DOES NOT WARRANT THAT THE SYSTEM WILL MEET CUSTOMER'S REQUIREMENTS, OR THAT THEIR OPERATION WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT ANY ERRORS CAN OR WILL BE FIXED. ARRIS HEREBY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, ORAL OR WRITTEN, WITH RESPECT TO THE SYSTEM AND SERVICES INCLUDING, WITHOUT LIMITATION, ALL IMPLIED WARRANTIES OF TITLE, NON-INFRINGEMENT, INTEGRATION, MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE AND ALL WARRANTIES ARISING FROM ANY COURSE OF DEALING OR PERFORMANCE OR USAGE OF TRADE. EXCEPT AS INDICATED IN THE APPLICABLE SYSTEM PURCHASE AGREEMENT, ARRIS SHALL NOT BE LIABLE CONCERNING THE SYSTEM OR SUBJECT MATTER OF THIS DOCUMENTATION, REGARDLESS OF THE FORM OF ANY CLAIM OR ACTION (WHETHER IN CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE), FOR ANY (A) MATTER BEYOND ITS REASONABLE CONTROL, (B) LOSS OR INACCURACY OF DATA, LOSS OR INTERRUPTION OF USE, OR COST OF PROCURING SUBSTITUTE TECHNOLOGY, GOODS OR SERVICES, (C) INDIRECT, PUNITIVE, INCIDENTAL, RELIANCE, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING, BUT NOT LIMITED TO, LOSS OF BUSINESS, REVENUES, PROFITS OR GOODWILL, OR (D) DIRECT DAMAGES, IN THE AGGREGATE, IN EXCESS OF THE FEES PAID TO IT HEREUNDER FOR THE SYSTEM OR SERVICE GIVING RISE TO SUCH DAMAGES DURING THE 12-MONTH PERIOD PRIOR TO THE DATE THE CAUSE OF ACTION AROSE, EVEN IF COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THESE LIMITATIONS ARE INDEPENDENT FROM ALL OTHER PROVISIONS OF THIS AGREEMENT AND SHALL APPLY NOTWITHSTANDING THE FAILURE OF ANY REMEDY PROVIDED HEREIN. NVG468MQ Ethernet and FTTH Gateway Quick Start GuideIntroductionUse this Quick Start Guide to install, configure, and perform basic troubleshooting for the ARRIS™ NVG468MQ Ethernet and FTTH Gateway.Power Supply InstallationConnect the power supply cord to the power connection on the gateway. Plug the power supply into an appropriate electrical outlet.WARNING:  The power supply must be connected to an outlet with a protective earth connection. Do not defeat the protective earth connection.Product VentilationThe gateway is intended for residential use. Position the gateway in an upright vertical position and locate it where temperatures remain within a range of 32° – 104°F (0° – 40°C) and where heat from the unit itself is not trapped, requires at least two inches (2”) of clearance on all sides except bottom.Gateway Positioning, Status Indicator Lights and Port ConfigurationProper positioning of the gateway is essential for proper cooling. Colored LEDs on the gateway indicate the status of various port activity.LED StatusPowerSolid Green = The device is powered.Flashing Green = The device is booting. Solid Red = Boot failure. Flashing Red = Detecting Factory Reset (press and hold the recessed Reset Switch for 1 second to reboot the device and for 10 or more seconds to trigger the factory reset). InternetSolid Blue = Broadband Internet connection is active.Solid Red = No IP address  or authentication failed. Off = No active Broadband connection.Broadband   Solid Green = Ethernet WAN connection is active.Solid Red = No Broadband Ethernet WAN signal on the line.  MoCA LANSolid Green = MoCA LAN connection is active.Flashing Green = MoCA LAN is detecting, connecting and configuring.Solid Red = No MoCA LAN signal on the line. Off = MoCA is disabled.Wi-FiSolid Green = Wireless enabled (either radio).Flashing Yellow = WiFi Protected Setup (WPS) is active. • Slow flash = less than 3 sec WPS push for 5GHz SSID user pairing. Can be changed to 2.4GHz.• Fast flash  = 3 sec or longer WPS push for 5GHz Video SSID pairing.Flashing Red =  WPS timeout or conflict.Solid Red = Wireless network failure. Off = Wireless disabled (both radios).LAN/WAN EthernetLEDs on rear panel RJ45 portsSolid Green = Port is active.Flashing Green = Traffic passing on the line. Off = Port not active.Phone LineSolid Green = All VoIP voice lines are registered and active.Flashing Green = A voice line is ringing or off-hook. Solid Yellow = Both lines of a two line system are provisionedwith one unregistered.Solid Red = All provisioned VoIP voice lines are provisioned but but not SIP registered.Off = VoIP  is not provisioned, or the gateway power is off.PowerWi-FiBroadbandPower ConnectionPower ButtonONT Broadband Port LAN Ethernet Ports With LED SupportUSB PortPhone JackPhone Reset Switch (recessed)Do Not PositionHorizontally5cm/2” Minimum Spacing5cm/2” InternetMoCA WPSMoCA Cable Connector
Sours: https://usermanual.wiki/ARRIS/NVG4XXQ.Users-Manual-NVG468MQ-pdf

Friend into the hot gorge of her hospitable ass. The bus rocked over bumps and bald patches of asphalt, and I also rocked to the beat, moving in this tightness in Larisa's ass, getting. Incredible pleasure from her elastic ass and from this incredible situation. By the way, it looks like she liked that too.

Manual arris pdf nvg468mq

Zoya asked. Tomorrow is almost the last day we can do this. Because after the day after tomorrow in the morning we have a train to Moscow, - said dad.

How to INSTANTLY Make Your WiFi Speed Faster

A strange mosaic. - Lips, lips. - she suddenly whispered, smearing the remnants of lipstick on her cheeks, - lips, I remember someone's lips and a passionate kiss. Dont look at me, I didnt kiss you, said the young man, a little embarrassed by his gaze. Yes, and indeed, the boy looked too cutesy for this, he is hardly interested in girls.

Similar news:

Sitting behind and grabbing the girl by the bulging buttocks, the negro drove her dick into a wet fucked pussy. The boa was sitting on the couch with her legs spread and Kelly jerked off and sucked his cock sticking up. Boar's cock moved elastically in Kelly's leaky hole. Yes, she groaned.



12833 12834 12835 12836 12837