Pfister shower cartridge removal

Pfister shower cartridge removal DEFAULT


YouTube Cover Image

How to Replace Ceramic Disc Cartridges for Pfister Widespread Bathroom Faucets

YouTube Cover Image

How to Replace Hot and Cold Side Valve Bodies for Pfister Widespread Bathroom Faucets

YouTube Cover Image

How to Replace Hot and Cold Cartridges on a Pfister Widespread Bathroom Faucet

YouTube Cover Image

How to Remove and Replace a Cartridge on a Wide Spread

YouTube Cover Image

Installing a Ladera Widespread Bathroom Faucet

YouTube Cover Image

Push & Seal Tool-Less Drain Assembly

YouTube Cover Image

Quick Install Tool for Bath Faucets

YouTube Cover Image

How to install new end body on a bath faucet


How to Remove a Pfister Shower/Tub Stem

By Josh Arnold

Replacing the shower/tub stem ensures smooth faucet operation.

A Pfister shower/tub stem is a valve you operate when turning the handle to get cold or hot water from the faucet. Over time and because of constant use, seals inside the stem wear away, which can lead to leaks either at the handle or the tub spigot. Replacing the stem is a simple job if you have the correct tools and about a half-hour of time. Doing this repair yourself can save you the headache of finding and paying a plumber.

Turn off the water supply to the shower/tub before attempting any repairs; the shut-off valve may be in the bathroom, basement or under your home's foundation. Turn the faucet handle to remove any standing water in the plumbing.

Locate the center screw that secures the handle to the shower stem. Remove a possible decorative cap at the center of the handle by using a small flat-head screwdriver. Turn the center screw counterclockwise to remove it.

Remove the handle from the stem by pulling it straight out from the shower/tub wall. Remove any escutcheon, which is the decorative casing around the stem, that may surround the stem and stem hole. To remove the escutcheon, you may be able to pull it off or you might have to unthread it by hand, depending on the shower/tub handle design.

Slide the correct-size tub and shower socket over the stem of the shower valve. When it is tightly fitted over the hex head of the stem, attach an adjustable wrench to the back end of the tub/shower stem socket.

Turn the wrench counterclockwise to loosen and remove the stem.


  • Some escutcheon are secured into place with a screw or a small bolt. If the escutcheon does not come off by hand, inspect the bottom for any of these fasteners.


  • When turning the water back on, turn the valve slowly to prevent a huge buildup of pressure in the plumbing. This pressure, if strong enough, can damage seals or pipe connection points, causing leaks.

Writer Bio

Josh Arnold has been a residential and commercial carpenter for 15 years and likes to share his knowledge and experience through writing. He is a certified journeyman carpenter and took college-accredited courses through the Southwest Regional Council of Carpenters training center. As a Los Angeles-based union carpenter, Arnold builds everything from highrises to bridges, parking structures and homes.

  1. Free woodland animals svg
  2. Music legends wall art
  3. Final fantasy hd remake
  4. Newest jeezy songs
  5. Modern potted plants outdoor

How to Fix a Price Pfister Shower Faucet

There are a couple of reasons why a Price Pfister shower cartridge needs to be repaired or replaced. For instance, a pull and turn tub and shower valve can be hard to pull out. As such, the cartridge needs to replaced and usually that fixes the problem, and so does lubricating the o-rings. Water dripping is also a sign that your shower cartridge is worn out. This issue can be remedied by replacing the cartridge. Here is a guide on how to fix your Price Pfister shower faucet.

1. First Things First, Turn Off The Water.

You always have to shut off the water whenever you are working with the plumbing. It’s a precaution as well as for your own protection. The last thing you want is to get drenched, right? Or worse, the last thing you want is for your bath to get soaking wet. Limit the problems to what you currently have.

While you can technically still remove the handle and trim the plate before shutting of the water, there’s always a chance that you will turn the cartridge on when you remove the handle. The result of this? You getting wet.

2. Remove The Handle.

Using a flat screwdriver, take off the cap covering the handle screw (with the screwdriver’s aid, you can easily pop this off). This step is done so you can get access to the screw. From there, loose the handle screw so you can pull the handle right out from the wall.

3. Take Both The Escutcheon And Trim Plate Off.

Turn the escutcheon counterclockwise to unscrew it. This is done best using your own hands so damage can be avoided. After doing this, remove the trim plate by twisting it off; if not, unscrew it but only if necessary. Doing all of these gives you a view of the valve and cartridge. The following steps will show why you need to have the water off.

4. Get The Cartridge Out.

Remove the nut holding the cartridge in place out to pull the cartridge out of the valve. Using pliers, turn the large nut counterclockwise in order to unscrew it. Keep in mind that this nut can be hard to remove, particularly if the valve is rather old. If this is the case, you might want to put penetrating oil on the threads just so you won&#;t have too much trouble. Once the nut has been removed, you can pull out the cartridge using pliers.

5. Replace Or Lubricate The Cartridge.

The steps for replacing a cartridge are pretty much the same as removing them: push the cartridge in, screw the nut then test before putting the trim and handle back.

Lubricating is best used when the problem is not a leak but something along the lines of a stiff handle. Try to see if lubricating the cartridge solves the issue. One of the best solutions you can use is silicone grease as this helps the cartridge move more smoothly within the valve body.

Fixing a Price Pfister shower faucet isn’t that difficult. All you need by your side are time and patience and you’ll get your shower faucet fixed in no time. But if the steps here don’t solve your problem, it’s always best to call in a professional to help you out.


How to Repair a Price Pfister Shower Valve

  1. 01 of Fixing Price Pfister Shower Faucets.
  2. Turn Off the Water.
  3. Remove the Faucet Handle.
  4. Remove the Escutcheon.
  5. Extract the Cartridge.
  6. Replace or Lubricate the Cartridge.

Click to see full answer

Similarly, you may ask, how do you adjust a Price Pfister shower valve?

How to Adjust a Price Pfister Shower Valve Stem

  1. Loosen the set screw located on the underside of the shower valve handle.
  2. Unscrew the trim sleeve, being careful not to lose the O-ring seal that seals it to the trim flange.
  3. Pull the mixing valve adjustment gear out of the valve so the stem is free to turn fully counterclockwise.

Similarly, is Pfister compatible with Moen? Save time and money by installing the new Pfister Universal Tub and Shower. It is compatible with existing Delta, Moen and Pfister valves already installed. Beautiful designs in a variety of finishes provide multiple choices for your upgrade project. A 5-function showerhead delivers an experience that is right for you.

Also know, are Price Pfister shower valves interchangeable?

If they do have the trim and not the valves, then it is a problem with the company, not Price Pfister. Re: Are Tub/Shower Valves Interchangeable? First, you absolutely CANNOT mix manufacturers on trim and rough-in valves.

How do you take apart a Price Pfister bathroom faucet?

How to Take Apart a Price Pfister Bathroom Faucet

  1. Go under the sink and turn off the two water valves to shut the water off to the faucet.
  2. Turn the water supply connections at the faucet handles counterclockwise with a wrench until you can turn them by hand.
  3. Turn the plastic thumb nuts counterclockwise with your fingers.

Removal cartridge pfister shower

How to Remove a Price Pfister Shower Faucet

A Price Pfister shower faucet is basically a valve that operates when you turn the handle to get hot or cold water. It works with the handle functioning like an airlock, only that the element going through it is water. By turning the handle, the valve will open 2 valves that let more hot and cold water through as you turn the handle more. This type of faucet definitely has a lot of moving parts in it, which means that it is more likely to get wear out more quickly than other types of faucets. Due to constant use, the seals inside it, such as the O ring, wear away and cause leaks, which you should repair. In this article, we offer you a step-by-step guide on removing a Price Pfister shower faucet.

1. Secure The Things That You Will Need.

Removing this faucet is a very simple task, considering that you got all the need tools at hand. These include a Phillips screwdriver, flat-head screwdriver, adjustable wrench and shower stem sockets.

2. Turn Off The Water Supply To Your Shower Or Tub.

Make sure you do this before you start removing any component. You will find the shut-off valve in your bathroom or basement. If you do not find it in these areas, then turn off the main water supply to your home instead. To remove any standing water in the plumbing system, turn the faucet handle during this step.

3. Remove The Handle.

First, make sure to shut the drain, as the last thing you would want when working with small parts is accidentally dropping them down the drain. With the drain shut, locate the screw at the center of the faucet handle that secures it to the shower stem. If there is a decorative cap at the center of the handle, pry it with a small flat-head screwdriver to access the screw. Remove the screw by turning it counterclockwise and then remove the handle from the stem by pulling it straight out from the wall. Most likely, there is an escutcheon, which is a decorative casing around the stem, which you have to remove as well. This can be done by pulling the component off or unthreading it by hand.

4. Slide The Appropriate Shower.

Put the tub socket over the shower valve stem and then attach an adjustable wrench to the back-end of the socket. To loosen and finally remove the stem, turn the wrench counterclockwise.

More Useful Tips

By the time you get the handle off, you will find a little piece with a Phillips head, so make sure you set it aside. You will also find a piece of plastic that determines the hotness and coldness of the water. Take a picture of how it is set, so you will be able set it back the way it is, or you will get either a really hot or really cold shower.

When turning the water supply valve back on, make sure you do it gradually to prevent a huge and sudden build-up of pressure in your plumbing system, which can damage connections and seals.

12 things Price-Pfister doesn't show and tell you in their training video.

Everything, Zheka, come on. I was glad to see you, I said. - And I like you. When else will you come.

You will also like:

You can go crazy. Even with the help of Vicki, it was not removed in any way. The people around were staring with all their eyes, especially the male half. Still such a circus. And this dress was already starting to infuriate me.

516 517 518 519 520