Leaf guard installation cost

Leaf guard installation cost DEFAULT

Your gutters are important when it comes to protecting your home’s roof, siding, foundation, and landscaping from the effects of rainfall. However, gutters can be a pain to clean, especially if they’re surrounded by tree-heavy landscaping. Leaves, sticks, pine needles, and other debris can easily clog gutters, negating their protective function and sending water pouring over the edge.

Gutter guards, also called leaf guards, prevent debris from entering your gutters and make the cleaning process a little easier. In this guide, we’ll discuss the most common types of gutter guards and how much you can expect to pay for each one to help you find the best gutter guards for your home.

Benefits of Gutter Guards

While many people think that installing gutter guards is a free pass to never cleaning out their gutters again, this is a misconception. Gutter guards block most debris, but no device will ever completely block debris from entering your gutters.

Here are a few benefits of installing gutter guards:

  • Prevents animal and insect infestations
  • Reduces the chances of a fire
  • Improves your gutter’s water flow
  • Prevents premature rust and corrosion

How Much Does It Cost To Install Gutter Guards?

Gutter guard materials are typically priced by the linear foot, and the average home has about feet of gutters. Here’s how much gutter guards cost to install, by type:

Cost

CostGutter guard price per linear footGutter guard price for linear feetProfessional installation cost per linear footTotal gutter guard installation cost
Plastic screen$ to $$80 to $DIY$80 to $
Perforated aluminum$ to $$ to $$ to $$ to $1,
Steel screen$ to $$ to $$ to $$ to $1,
Foam$ to $$ to $DIY$ to $
Micro-mesh$ to $$ to $$ to $$ to $1,
Brush$ to $$ to $DIY$ to $
Gutter helmets$ to $$ to $1,$ to $$1, to $4,

Note: To save money, you can install most types of gutter guards yourself. However, if your house is two stories or higher or you have a steep roof, consider paying a professional to complete your gutter guard installation.

Keep in mind that these are average gutter guard installation costs. Material prices and installation costs may vary from location to location. Request a few quotes from roofing and general contractors in your area to compare pricing.

Factors To Consider Before Installing Gutter Guards

From the width of your gutters to your current climate, here are four important factors to consider before installing gutter guards:

  • Width of your gutters—Make sure you measure your gutters before purchasing guards. Most gutters are five inches in width, but some houses may have four- or six-inch gutters.
  • Climate—If the climate you live in gets a lot of snow and ice, flimsy plastic mesh guards probably aren’t the best option. Instead, consider going with a hardier metal, such as steel.
  • Roof type—Steep roofs, less accessible roofs, and long rooflines will incur higher installation costs.
  • Type of guard—From plastic screen guards to durable steel screens, the type of guard you choose will depend on your budget and cleaning preferences.

Types of Gutter Guards

Most gutter guards are made of plastic, metal, or a combination of the two. They either sit on top of the gutter or rest inside it. Here are a few common types of gutter guards.

Plastic Screen

The least expensive gutter guards are made out of PVC plastic, and the quality is reflected in the price. Typically, you’ll purchase the material in rolls that are the approximate width of your gutter and cut them before installation. This makes for a fairly easy DIY project, since you simply lay the screen on top of the gutter and tuck the edges under the eave.

These gutter guards stand up reasonably well against leaves and pine needles, but unfortunately, they can be easily blown away or knocked out of place. Additionally, the plastic can become brittle or warp under extreme temperatures. On average, plastic guards only last for three to six years.

Perforated Aluminum

Another affordable gutter guard material is aluminum sheeting perforated with small holes. This guard is also relatively easy to install and fastens onto your gutters either with included fasteners or by bending the edges to fit around the gutter. You’ll need a hacksaw, tin snips, and gloves for maneuvering the guard safely around the sharp edges of your gutter.

Aluminum gutter guards block most debris and don’t rust. They typically last for 10 to 20 years. However, when seeds or other small debris get inside your gutters, you’ll find these guards are difficult to remove for cleaning.

Steel Screen

Steel mesh gutter guards are similar to plastic guards, but they’re more durable and robust. They’re just as easy to install as plastic guards, though you’ll need to use tin snips to fit the gutter guard in your gutter. Steel screen gutter guards are great for blocking leaves and pine needles and are relatively easy to clean—simply wait until the collected debris is dry and brush it away. On average, steel guards last between seven and 10 years.

However, not all steel screen guards are created the same. Make sure you purchase a powder-coated metal guard, as this will repel rust, and avoid the type of steel guard that fastens by tucking under the first layer of shingles, which will expose your roof deck to rain and could void your roof’s warranty.

Foam

While screens and mesh guards sit on top of a gutter to prevent debris from falling in, foam gutter guards sit inside the gutter, making them one of the easiest types of gutter guards to install. These polyurethane foam wedges are porous enough to allow water to flow through the gutter and down the spout, but leaves and other debris stay on top of the foam and slide off.

Unfortunately, even polyurethane breaks down over time, sending microplastics into the runoff and groundwater. Additionally, algae and fungus can grow on the foam, making it unsightly and smelly, so you’ll have to remove the foam and wash it from time to time. While these foam inserts can last up to 10 years, they won’t last nearly as long in wet or sunny climates.

Micro-mesh

These gutter guards are made out of plastic, steel, or aluminum, and they’re more expensive than other mesh guards because of the fineness of the mesh. Micro-mesh guards have smaller holes, which prevent debris, but the smaller holes can become blocked more easily. Because of this, micro-mesh guards are a good option for houses in wet climates surrounded by large, leafy trees.

The price and durability of these guards varies by material. Plastic will be the least expensive, but it may only last for three years. Powder-coated metal can last for up to 12 years, but it’s pricier than plastic micro-mesh guards.

Brush

Similar to foam gutter guards, brushes sit inside the gutters and block the flow of debris. These are metal rods with nylon or plastic bristles attached at all angles, just like a circular brush. They install very easily, though you’ll have to cut them with a hacksaw if they’re too long. They’re durable, lasting 10 to 20 years, but they’re also fairly expensive.

While brush guards protect against large debris and dry leaves, seeds and pine needles can stick to the bristles, making them difficult to clean. You may have to clean the brushes as often as you would the gutters. Additionally, as the bristles degrade, you’ll have the same problem with microplastics as you would with the foam.

Gutter Helmets/Surface Tension Guards

Unlike other types of gutter covers, solid-surface gutter helmets cover the entirety of the gutter and feature a metal lip that points down towards the outer edge of the gutter. Water runs down the helmet and onto the lip thanks to surface tension, while leaves and other debris slide off the cover. You can use a broom to remove any debris that doesn’t slide off the cover.

Gutter helmets and surface tension guards are highly durable and can last up to 20 years. However, one end of the guard is fastened to the roof’s fascia, which requires a professional installation by a gutter guard company. Add installation costs to material costs, and gutter helmets are easily the most expensive option on our list.

Note: You may need to purchase surface tension gutter helmets directly from a company that makes and installs them.

Best Gutter Companies

There are so many gutter companies in the market that it might be difficult to figure out which company is best for you. We have conducted an in-depth review of dozens of gutter companies, including their products and services. Check out the best gutter companies below.

LeafFilter

LeafFilter makes an excellent gutter guard with maximum protection and strength. Its patented micron steel mesh gutter guard includes a lifetime, transferable warranty.

The company offers a thorough installation process in which a LeafFilter specialist provides a free in-home inspection to determine where there are areas of concern. When the specialist returns for the installation, they remove ineffective gutter guards and install new gutters, if needed. The specialist also cleans and preps your gutter system for LeafFilter installation. Finally, the specialist secures the LeafFilter to your gutter.

To see if LeafFilter is available in your ZIP code, fill out this easy-to-use form.

HomeCraft Gutter Protection

HomeCraft features one of the best gutter guard designs. Its gutter guards use a patented, raised-screen design called Diamond Raised Technology. Paired with its marine-grade stainless steel and fine mesh material, HomeCraft’s gutter guards are able to allow water to flow freely through its holes while debris is pushed away. This design also keeps wind freely blowing through your gutter system when dry.

HomeCraft features locations throughout ​​Alabama, Colorado, Florida, Georgia, Indiana, Kentucky, North Carolina, South Carolina, Tennessee, and Texas.

To see how HomeCraft helps you cut back on cleaning your gutters, fill out this brief questionnaire or speak to a representative at

All American Gutter Protection

All American Gutter Protection is another of our picks for the best gutter companies on the market. It offers micro-mesh gutter guards that come in more than 30 colors. Similar to LeafFilter, it also provides free home inspections. The company also features high customer reviews on popular reviews sites like the Better Business Bureau (BBB).

It is only available in 15 states, though. States include Alabama, Delaware, Florida, Georgia, Indiana, Kentucky, Michigan, New Jersey, North Carolina, Ohio, Pennsylvania, South Carolina, Tennessee, Virginia, and West Virginia.

If you want to see how All American Gutter Protection can help your home's maintenance, complete this short survey or call it at

To share feedback or ask a question about this article, send a note to our Reviews team at [email protected].

Sours: https://www.thisoldhouse.com/gutters//gutter-guard-installation-cost

How Much Does It Cost to Install Gutter Guards?

Leaf guards and gutter guards are sold and installed by the linear foot. There are several types of guards and materials, meaning there is a range of costs for the project. The average cost range for the material is between $ and $ a linear foot, with installation costing an additional $2 to $12 a linear foot, depending on who installs it. This makes a total cost range of $ to $ a linear foot. Below are the average cost ranges for installing different lengths of guards.

Cost to Install a 50, 75, , , or Linear Feet Leaf Guard

Cost to Install a 50, 75, , , or Linear Feet Leaf Guard

Gutter LengthAverage Cost Range (Installed)
50 Linear Feet$ - $
75 Linear Feet$ - $1,
Linear Feet$ - $1,
Linear Feet$ - $3,
Linear Feet$ - $5,

Compare prices from gutter guard installers near you

When calculating the average cost for gutter covers, one unit of measurement used by manufacturers as an alternative to linear feet is square footage. You can’t convert linear feet to square footage without first knowing both the length and width. Linear feet only represent the length of the gutter guard, while the square footage considers the width. For example, if your bedroom is 15 feet by 15 feet, then the room is square feet. The average cost of gutter covers per square foot without installation is $2 to $10.

Keep in mind that the industry standard for providing cost estimates for gutter covers is in linear feet. Your home’s square footage is typically only asked for by professionals before installing leaf guards.

Gutter Guard Cost by Type

Gutter guards range in price depending on the material type. Each type differs in cost, durability, and effectiveness. Before choosing a type, understand the pros and cons of each.

Average Cost of PVC, Mesh, Aluminum Perforated, Stainless Steel, Micro-Mesh, Foam, Brush, or Surface Helmet Gutter Guards

Average Cost of PVC, Mesh, Aluminum Perforated, Stainless Steel, Micro-Mesh, Foam, Brush, or Surface Helmet Gutter Guards

MaterialAverage Costs per Foot (Material Only)
PVC Screen$ - $
Mesh Guard$ - $
Aluminum Perforated Cover$ - $
Steel Screen$ - $
Micro Mesh$ - $
Foam Guard$ - $
Brush Guard$ - $
Surface Tension/Gutter Helmets$ - $

PVC Gutter Guard

PVC gutter guards cost between $ and $ a linear foot. PVC/vinyl screens are the lowest quality screens. The guards lay on the gutters and can be tucked under the eave 1 or drip edge without any fasteners. They are usually sold in lengths of 3 to 4 feet long. They are also easy to install. Lay them into the gutter and snap under the edge. They are best for leaves and needles, and you can expect durability up to 6 years or 3 years in harsh climates.

Mesh Gutter Guard

Depending on the material, mesh gutter guard prices range from $ to $ a linear foot. Mesh gutter guards come in stainless steel and aluminum. Like surface tension/gutter helmets, these mesh screens keep out most debris but may have trouble with small debris slipping through. Mesh gutter guards are best for hardwood leaves and last for 3 to 12 years, depending on the material, with plastic being the least durable and aluminum the most durable.

Aluminum Perforated Gutter Guard

Aluminum perforated gutter covers cost between $1 and $ a linear foot.Perforated aluminum covers come in lengths of 4’-8’. They also install easily, laying directly on the gutter and tucking beneath the eaves without fasteners 2. The perforations allow water to go through easily, but they can get blocked by wet leaves. Perforated aluminum covers are best for all debris types and last 10 to 20 years.

Stainless Steel Gutter Guard

For a stainless steel gutter guard, expect to pay between $ and $ a linear foot. Steel screens are more durable than PVC and aluminum screens. Most come in pre-cut widths and lengths but can easily be cut using tin snips 3. Some types of steel screens curl down between the gutter and fascia. Some types tuck under the first layer of the shingle and should be avoided to prevent damage. Steel screens are best for both leaves and needles, and expect 7 to 10 years of use if they are powder-coated. If not powder-coated, expect a year lifespan.

Micro-Mesh Gutter Guard

Micro-mesh gutter guards cost between $ and $ a linear foot. Micro-mesh covers are a much tighter guard than standard mesh. While a standard mesh cover can let smaller debris through, a micro-mesh cover keeps out all but the tiniest particles. Unlike regular mesh, these guards are stiff and inflexible. They are more difficult to install, but they still tuck under the eaves without fasteners. They are usually sold in lengths of about 4 -feet.

Foam Gutter Guard

Prices range from $ to $ a linear foot for foam gutter guards and are designed for DIY installation. When looking for a fast solution, a foam gutter guard can be a good choice. This is a roll of foam that you place inside the gutter. It does not block everything, but it keeps the larger pieces and leaves out. This system needs to be cleaned regularly, but it helps solve clogging problems.

Brush Gutter Guard

Brush gutter guards cost between $ and $ a linear foot. Brush gutter guards work on the same principle as the foam guard. You place the brush inside the gutter, and it catches the larger pieces of leaves and debris. Like the foam guard, you need to periodically clean off the brush. However, the installation is fast and easy and designed to be done DIY, so there are no additional installation fees.

Gutter Helmets Cost

For gutter helmets, expect to pay between $ and $ per linear foot. Surface tension gutter guards, or gutter helmets, are made from a solid piece of metal covering the entire gutter. The outside edge curves downward to the gutter. Gutter helmets must be installed at an angle similar to that of the roof and work best on mild and moderately sloped roofs. These gutter guards last an average of 10 to 20 years, with some offering a lifetime warranty.

Find local pros to install your gutter guards

Leaf Guard Price by Brand

There are several manufacturers of gutter guards. Some are designed for professional installation and are made to fit your gutters and home, while others can be put in DIY or by your handyman. Each brand is known for making one or more specific types that may or may not fit your needs:

Cost per Foot of Leaf Guard by Brand: EasyOn, Raindrop, Valor, Bulldog, Gutter Helmet, Leaf Filter, MasterShield

Cost per Foot of Leaf Guard by Brand: EasyOn, Raindrop, Valor, Bulldog, Gutter Helmet, Leaf Filter, MasterShield

BrandAverage Cost Range per Foot (Material Only)
Leaf Relief$ - $
Gutterglove$ - $
EasyOn$2 - $3
RainDrop$3 - $5
K-Guard$7 - $10
Valor$8 - $11
Leafguard$9 - $32
Bulldog$10 - $14
Gutter Helmet$15 - $17
LeafFilter$15 - $35
MasterShield$17 - $20

Leaf Relief Gutter Guard Cost

Leaf Relief gutter covers have an average cost of $ to $3 a linear foot. Leaf Relief is an aluminum perforated gutter guard. It goes over the top of your gutter and tucks beneath the edge. They are visible from the street because they are not a flat cover. They are designed to help drain the maximum amount of water possible while keeping leaves out of the gutter. Each is about 4 feet long, and you can purchase them in packs of 20 for a lower cost. The Leaf Relief warranty is called “Never Clogs, Never Overflows” and provides protection for 25 years from the time your product is purchased.

Gutterglove Cost

Prices for Gutterglove options range from $ to $ a linear foot. Gutterglove makes a type of micro-mesh screen that snaps over the top of the gutter. These are flat, low-profile screens that are fairly easy to install. They come in 4-foot lengths and can be purchased in packs of 20 to get as many as 80 linear feet at once. They are made of durable aluminum and are fairly readily available at most big-box stores. Gutterglove offers a year limited parts warranty to protect customers against any potential manufacturer defects.

EasyOn Gutter Guards

Easy ON gutter guards will cost between $2 to $3 a linear foot and are available in packs of up to 24 feet. Easy On gutter guards are a type of micro-mesh guard designed to be easy to install. They are readily available in lengths of about 4 feet, and you can purchase them in packs for a small discount. These guards are fairly flat and less easily seen from the street. Customers that purchase the Easy On gutter guard system for their home receive a year limited parts warranty from the manufacturer.

Raindrop Gutter Guard Cost

RainDrop gutter covers cost an average of $3 to $5 per foot. RainDrop offers self-cleaning gutter systems. The company specializes in versatile fits that work with any home style. The systems are compatible with both 5” and 6” gutter sizes. Gutter covers can be cut from RainDrop to fit non-standard sizes. Gutter covers are constructed from a blend of polypropylene to remain flexible and withstand poor weather conditions. This material is resilient in warm weather climates. RainDrop has a warranty that lasts 20 years and can be transferred to the new homeowners after the sale.

K-Guard Cost

The average K-Guard gutter covers cost from $7 to $10 per foot. K-Guard fully integrates all of its guards with your home’s gutter system. This means that there is a perfect fit each time and no chance for debris to get in. You must purchase your guards directly from the company and have them professionally installed. Because the guards depend on your gutter’s type and installation, the pricing varies but costs around $7 per foot. The K-Guard system is backed by a lifetime “no clog warranty,” with the company stating that the covers should last for as long as the house stands.

Valor Gutter Guard Cost

Valor gutter guard cost per foot is between $8 and $11. If you are looking for options from stainless steel to copper filters in a range of styles, contact Valor. This company custom makes guards for your home. This means that they are guaranteed to fit and work no matter what size or style your gutters are. They also have options for filters and finishes, including several color options. The Valor gutter cover warranty lasts for 25 years and is transferable to new homeowners. The warranty provides limited parts protection.

LeafGuard Cost

LeafGuard systems will cost an average of $9 to $32 a linear foot. If you want to have your gutter guards professionally installed with no seams 4, consider LeafGuard. These are a solid, gutter cover or cap, rather than a mesh or perforated cover. The water flows over the top and under a lip to enter your gutter, where the leaves and debris cannot follow. This means that you never need to clean them off. They are custom made and installed to your gutters, so they tend to cost more than other brands. The Beldon LeafGuard is a one-piece system manufactured from thick pieces of aluminum. The system includes an integrated hood to optimize water flow and push twigs and other debris off the gutters. Beldon LeafGuard systems cost $14 to $32 per linear foot. LeafGuard is one of the few manufacturers that provides a lifetime “no clog” warranty on their gutter products. They also have a lifetime guarantee that the paint finish will not scratch or crack.

Bulldog Gutter Guard Cost

Bulldog gutter covers will be around $10 to $14 per foot for most projects. Bulldog gutter guards are an aluminum system that keeps water flowing freely through gutters and prevents any clogs. Style options include white or dark bronze, with both being made from 99% recycled aluminum materials. These gutter guards fit 5”, 6”, and 7” gutter sizes. The company provides a clog-free guarantee for 25 years from the time of purchase.

Gutter Helmet Prices

Customers pay between $15 and $17 a linear foot to purchase Gutter Helmet systems. Another custom-made gutter guard with a seamless appearance on your roof is the Gutter Helmet. This is a flat guard with a slightly rounded lip that provides an opening for water to drain. The guards are fairly unobtrusive but do a superior job of keeping leaves and other debris out of your gutters. They are made of solid material, so they last longer than thinner guards. The Gutter Helmet standard warranty protects their gutter covers for 35 years from the time of purchase.

Leaf Filter Gutter Guards Cost

Most homeowners pay between $15 and $35 per foot for LeafFilter covers. LeafFilter systems rely on stainless steel micromesh to prevent clogged gutters. The mesh prevents even the smallest of debris from entering the gutters, including pine needles, seeds, and other types of grit. The mesh is rated at microns fine to keep out all debris while still allowing water to flow freely. The frame is made from UV protective materials to prevent it from warping or deteriorating from snow and ice. The LeafFilter gutter cover system is protected under a lifetime warranty that transfers to any new homeowner. If clogs occur, you will be refunded the full material cost.

MasterShield Gutter Guard Cost

On average, MasterShield Gutter guards cost between $17 and $20 a linear foot. If you live in an area where blue/green algae grows on your home and gutters, investing in a guard system from MasterShield can help. These are micro-mesh guards made with steel and infused with copper. The copper kills blue/green algae and stops the black streaks that can discolor gutters and the areas below them. The guards also do a superior job of keeping debris out of the gutters. MasterShield boasts one of the strongest lifetime warranties on their gutter cover systems with a promise of no clogs, or they will refund you the cost of your purchase.

Labor Cost to Install Gutter Guards

There are a few options to choose from when installing gutter guards. If you purchase your own gutter guards, you can hire a handyman to install them, averaging in cost from $2-$4 per linear foot. You can also hire a full-service gutter guard company that provides its own gutter guards and pro installation. This costs anywhere from $8-$12 per linear foot for the installation, but some companies roll the gutter cover installation cost into the material cost, depending on the project type. The duration of the work depends on your home’s size. Each type of gutter guard is designed to install differently. Some snap on, some hinge 5, and others require custom cuts with screws or bolts. A few companies make the guards to fit exactly, meaning they are cut on-site.

Professional Installing White PVC Screens

Gutter Guard Replacement

The effectiveness of the gutter guards determines if you need to replace them. If you’re noticing the gutters are becoming clogged in areas, then you should have them checked out by a professional to determine if you need a new system. You may be charged a $50 to $75 fee for the service. However, the fee may be waived if you decide to replace the guards. Damaged gutter guard screens could indicate the need for a new system. Less expensive types may have metal screens that become corroded or clogged up with dirt and debris after only a year of use. Professional systems are normally backed by a guarantee of 20 years or longer and should be replaced free of charge if they require replacement. However, if you need to replace them, expect to pay around $3 to $10 per foot for the average cost of gutter covers.

If you’re getting a new roof on your home, you may need gutter guard replacement. Most gutter covers are installed with the previous roofing type and material in mind. Talk to a contractor about whether you can reuse the gutters and gutter guards once the new roof is installed.

Talk to local pros to get quotes for your gutter guard installation

Factors Affecting the Cost of Gutter Guards

There are many gutter guard systems to choose from. When selecting the best system for your home, consider accessibility, roof type and configuration, home height, location, and climate because they impact your project’s cost. Accessibility plays a role in the installation of gutter guards on a home. On homes higher than a single story, it can cost more and require a professional to install. The installation of gutter guards also costs more if you have many rooflines 6 or a steep roof. Shallower or flat roofs are safer, easier to work on, and cheaper. Location and climate also play a role in selecting gutter guards. Homes in colder climates with snow and ice need gutters and screens to withstand the weight, such as a perforated aluminum material.

Gutter Guard Pros and Cons

Gutter guards offer many positives for homeowners, but they also have a few drawbacks. A clogged gutter can lead to issues like water around your home and foundation, which can lead to cracks. Having a gutter guard means that your gutters function properly, avoiding these issues. Gutter guards also mean that you do not have to clean your gutters as frequently, saving time and money. Some gutter guards also have added benefits, such as heat to prevent ice dams and copper to prevent algae. These attributes may help your gutters last longer.

However, gutter guards need to be cleaned on occasion, so they do not make your gutters completely maintenance-free. Some are visible from the street, which can detract from your home’s curb appeal. They can also bend or dent upon impact, which can make them less effective. If your roof is very steep, they also need to have proper installation so that the water does not overshoot them.

Gutter Guard Maintenance

Although gutter guards reduce gutter maintenance, they don’t eliminate it. On an annual basis, you should check the gutter guards to confirm that they are still secured properly to the gutters. Check for any signs of warping, chipping, or visible cracks. After any major storm, you should consider cleaning the gutter guards to remove any twigs, branches, and debris. Depending on the type of guard, you may be able to uninstall it from the gutters and simply hose it off. Once free of any debris, secure them back onto the home.

Cost of Seamless Gutters with a Leaf Guard

Seamless gutters have many advantages. They offer a better appearance and are less likely to develop leaks and other issues. A seamless gutter can be installed with a leaf guard system, either a seamless system made just for the gutters or a basic system fitted on top. The average cost of seamless gutters is around $3 to $30 a linear foot, depending on the material. Gutter guards cost $ to $ a linear foot. The cost to install seamless gutters with a leaf guard ranges from $ to $60 a linear foot.

PVC Gutter in Roof with Brush Guards

Screw On vs Snap On Gutter Guards

There are two main types of gutter covers to consider. Some products simply snap onto the gutters, while others need to be fastened with screws. Snap on types are usually simpler designs and fit directly over gutters. In many cases, homeowners won’t use a professional to install this version. The snap on guard effectively keeps out large debris such as leaves and twigs. The disadvantage of this type is that since the gutter cover isn’t customized to your home, results aren’t always the best for the product. Snap on versions cost under $5 per foot.

Screw on versions are more effective at keeping out more debris, including smaller objects such as pine needles and roof grit because they are custom fitted. However, they do require professional installation and will be more costly, with prices $7 or more per foot.

Get free estimates from gutter guard installers near you

Enhancement and Improvement Costs

Gutter Cleaning

Cleaning the gutters prevents future leaks and water pooling. Many companies offer semi-annual cleaning to avoid water pooling. The average cost to have the gutters cleaned is $.

Heated Gutter Guards

Heated gutter guards are great for homeowners in cold regions. The heated gutter guards prevent snow and ice from building up in the system to eliminate any issues associated with ice dams and keep water from entering the home. The average cost to install heated gutter guards ranges from $1,$5,. If gutter guards are already installed, the heated system can be installed on the existing gutters to save money.

Downspout Screens

Downspout screens, also known as foam filters, prevent leaves and other large debris from clogging the gutter downspouts. Many of the screens are designed to fit in any downspout to ensure smooth drainage. These screens can prevent you from having to manually clean the downspouts. The cost for a downspout screen is approximately $2-$5 each.

Downspout Extensions

Downspout extensions are a great investment for your gutters. A downspout extension controls how water falls from your gutters and diverts water away from your home’s foundation. The average cost for a downspout extension is approximately $8-$12 each.

FAQs

  • Are gutter guards worth it?

Based on client reviews and ratings, the best gutter guards on the market for their effectiveness and cost are LeafGuard and Gutter Helmet.

  • How much should I pay to have my gutters cleaned?

Yes, gutter guards can be installed on existing gutters. Most gutter guards are designed to fit on existing gutters that measure between the standard size of 5” to 7.” Existing gutters are often resealed as part of the installation process.

  • What are the best gutter guards on the market?

Gutter guards are effective at doing their job. There may be times that small debris slips through the mesh, but the gutters do not need cleaning as often.

  • Can you install gutter guards on existing gutters?

Expect to pay from $70 for a basic gutter cleaning to $ for gutter cleaning on difficult-to-reach gutters with clogged spouts. The average homeowner pays $ to have feet of gutter cleaned on a one-story house.

  • Do any gutter guards really work?

Gutter guards are worth it for homes that are constantly exposed to leaves and debris. Gutter guards can reduce how often you have to clean out your gutters and will pay for themselves over a short period.

Remodeling Terms Cheat Sheet

Definitions in laymen's terms, cost considerations, pictures and things you need to know.
See full cheat sheet.

1Eave: The edge of a roof that connects with the wall of the building. Usually this part of the roof comes out further than the wall

2Fasteners: Hardware used to attach two or more objects to each other. A common example is a nail

4Seams: A fold, line, or groove where two pieces of material join together

glossary term picture Hinge5Hinge: A type of joint that attaches two items together but allows one of them to swing back and forth, such as a door attached to a door frame
glossary term picture Soffit6Rooflines: Construction material, typically composed of vinyl or aluminum, used to enclose the underside of eaves and ceilings

Cost to install gutter guards varies greatly by region (and even by zip code). To get free estimates from local contractors, please indicate yours.

Sours: https://www.fixr.com/costs/gutter-guard-installation
  1. Ikea display box
  2. Taymac deck outlet cover
  3. Does alcohol dilute urine
  4. 2008 f150 transmission
  5. Sandblast cabinet metering valve

How Much Do Leaf Guards / Gutter Guards Cost?

Homeowners typically spend between $ and $1, (or between $ and $ per linear foot) to install gutter guards, also known as leaf guards.

The average cost for gutter guard installation is $1,. Low-end leaf guard installation projects average around $, while high-end installation projects with quality materials cost an average of $4,

Leaf guards are covers that help prevent branches, leaves, and even animal nests from clogging up your rain gutters. While gutter guards aren’t entirely maintenance-free, they do reduce the need for routine gutter cleanings. Over time, an effective gutter guard system will pay for itself. 

Total spending will depend on many factors, including the type of gutter guard you buy, who installs the gutter guard, and the gutter guard’s brand.

Need to install new rain gutters or want to trim back some leaf-shedding trees? We’ll help you estimate those bills, too. 

How Much Do Gutter Guards Cost?

  • National Average Cost: $1,
  • Typical Range: $ to $1, (or $ to $ per linear foot)
  • Low-End: $
  • High-End: $4,

Most homeowners can expect to pay $ to $1, (or $ to $ per linear foot) for professional installation, with an average cost of $1,. 

Materials alone typically cost $ to $ per linear foot. Labor costs will vary depending on whether you install the gutter guards yourself, hire a handyworker, or hire a full-service contractor. 

Most manufacturers sell their leaf guard products by the linear foot, and most professional installers charge their labor rates by the linear foot. The more gutter guard material you need for your gutter system, the more you can expect to pay for the project. 

On average, professional leaf guard installation costs $ to $ per linear foot for materials and labor. Materials alone typically cost $ to $ per linear foot.

LINEAR FEET OF GUTTER GUARDAVERAGE COST
* materials only
AVERAGE COST
* labor and materials
25 feet$17 to $$ to $
50 feet$34 to $$ to $
feet$68 to $$ to $1,
feet$ to $1, $ to $1,
feet$ to $1, $1, to $2,
feet$ to $1, $1, to $3,
feet$ to $2,$1, to $3,

Other Factors That Affect Cost

Gutter guard costs vary significantly depending on the type, brand, and quality, sometimes even falling below or above the typical price range.

Let’s take a closer look at the cost factors that might impact your total bill: 

  • Gutter guard type: Gutter guard types have different levels of effectiveness, leading to a difference in price. 
  • Brand: Some manufacturers make higher quality gutter guards than others. 
  • Home height: Installing gutter guards on a two-story home will cost more than installing gutter guards on a single-story home due to the increased risk of injury. 
  • Labor: Who is installing your leaf guards? Hiring a full-service contractor might cost more than hiring a handyworker, but it can be worthwhile. 
  • Accessibility: If an obstacle blocks your gutters, such as a tree, expect an increase in labor costs. 
  • Climate: Your local climate might dictate which gutter guards are best suited for your home. 

Gutter guard type 

There are many different types of gutter guards, all with varying degrees of effectiveness. Some are better at keeping out small debris, while others only target large debris. Some gutter guards last longer than others, too. 

Below you’ll find many popular gutter guard options and their materials costs. 

MATERIALAVERAGE COST PER LINEAR FOOT
* materials only
Plastic PVC Screen$ to $
Aluminum Perforated Cover$ to $
Metal Mesh Guard$ to $
Steel Screen$ to $
Micro-Mesh$2 to $
Foam Guard$ to $
Brush Guard$ to $
Surface Tension Gutter Helmets$ to $

Plastic PVC screen

Plastic PVC screens are your most affordable gutter guard option. But with the lower price comes lower quality. On average, most homeowners can expect to pay $ to $ per linearfoot for PVC gutter guards. 

PVC leaf guards are easy to install &#; just snap them into place without any fasteners. You don&#;t need to worry about rust with these gutter guards, but warping and bending can be an issue. Expect your PVC leaf guards to last 3 to 6 years. 

Aluminum perforated cover

Aluminum perforated covers typically cost between $ and $ per linear foot. Aluminum perforated gutter covers are more durable than plastic screens, easy to install, and aren&#;t susceptible to warping or rusting. 

The perforations allow water to enter the rain gutter, but the cover can get blocked by wet leaves. Aluminum perforated covers are long-lasting, needing replacement every 10 to 20 years. 

Metal mesh guard

Metal mesh guards are usually available in stainless steel or aluminum. This guard type ranges in price from $ to $ per linear foot and lasts 4 to 11 years, on average. Metal mesh screens block most debris, but tiny debris can still manage to slip through the holes. 

Steel screen

Steel screen gutter guards cost $ to $ per linear foot and are more durable than aluminum and PVC screens. 

Steel screen gutter guards typically last 5 to 10 years, though powder-coated steel screens can last 7 to 10 years. Powder coats are made up of fine resin particles, protecting the steel against fading and scratching. 

Micro-mesh

Micro-mesh leaf guards can be difficult to install and might not make the best DIY (do-it-yourself) project. Most homeowners can expect to pay $2 to $ per linear foot for micro-mesh gutter guards. 

Micro-mesh covers are excellent at blocking small debris, including those pesky pine needles. Micro-mesh holes are much smaller than other gutter guard holes, making it difficult for any debris to pass through. On average, these effective gutter guards last between 4 and 11 years. 

Foam guard

Foam guards are a roll of foam you insert in the gutter. The foam helps keep out large leaves and branches, but small particles can still find their way inside the gutter. This leaf guard material typically costs between $ to $ per linear foot. 

Foam gutter guards are susceptible to moss growth, so clean these gutter guards regularly. This leaf guard type will usually last 2 to 5 years in sunny and wet climates and up to 10 years in temperate climates. 

Brush guard

Brush gutter guards cost $ to $ per linear foot on average and typically last 5 years. 

Brush guards, similar to foam guards, are inserted into the gutter. Brush guards are made up of twisted wire or bristles that snatch large debris, but smaller debris still manages to slip by. Easy-to-installl brush guards also require regular cleaning and maintenance. 

Surface tension gutter helmets

Surface tension gutter helmets are the most expensive gutter guard option, costing most homeowners $ to $ per linear foot. A gutter helmet is a solid piece of metal covering the top of the gutter, preventing debris from entering the gutter system. 

These gutter covers are best for mild to moderately sloped roofing, need occasional cleaning, and typically last 10 to 20 years. 

Brand

Gutter guards are mady by many manufacturers, all producing different guard types with varying quality. Popular brands include LeafGuard, Gutter Helmet, and Leaf Filter. 

High-quality gutter guards with reputable brand names are expensive, costing well over the national average for a gutter guard. Some manufacturers sell gutter guards for as little as $ per linear foot, while others sell gutter guards for as much as $ per linear foot (materials only). 

Other leaf guard brands include: 

  • Leaf Relief
  • EasyOn
  • Gutterglove
  • Mastershield
  • K-Guard
  • Valor

Home height

Expect labor costs to rise if the pro needs to install the gutters on the second story. Labor costs might also increase if the first story is exceptionally high off the ground.

Here’s why: The higher off the ground the pro needs to climb to install your gutter guards, the greater the risk of injury. 

For example, does your pro need to access the roof to install the second-story leaf guards? Labor costs might rise if your roof has a steep slope. Steep roofs are more dangerous to work on than flat, mildly sloped roofs. 

Labor

Most homeowners spend $ to $ per linear foot for professional gutter guard installation (materials and labor included). Materials alone typically cost $ to $ per linear foot. 

If you decide to install the leaf guards yourself, your labor costs will come to $0 (although you might lose out on a relaxing afternoon). 

Another option is to buy the materials yourself and then hire a local handywoman or handyman to install the guards for an average rate of $ to $ per linear foot. The total cost of this option amounts to $ to $ per linear foot for materials and labor. 

The third labor option is to hire a full-service gutter guard company or contractor. This option would include the contractor or company providing both the materials and labor (unlike the handyworker, who provides only the labor). 

Hiring a full-service contractor or company would fall in the typical range of $ to $ per linear foot. Although more expensive, a full-service operation is more likely to include a warranty on the materials and the installation. 

Accessibility

Is a tree blocking the pro&#;s ability to install the gutter guards safely? If an obstacle makes the pro&#;s job more difficult or increases the risk of injury, expect to pay more in labor costs. 

Climate

Not all gutter guards will be suitable for your region&#;s climate. Some gutter guards might not withstand extreme winds, ice dams, or heavy rains.

Foam guards, for example, last 2 to 5 years in sunny and wet environments and as long as 10 years in temperate climates. 

If you live in an area with extreme winters, you might want to consider installing heat tape to prevent ice dams from forming on your leaf guards. You may need to budget around $ per linear foot of heat tape or $73 per linear feet

Pro Tip: Talk to your local manufacturer or contractor about the best gutter guards for your area. 

Gutter guards are an easy way to limit gutter cleanings and water damage, but there are other steps you can take as well.

Maybe you need a brand new rain gutter system, or perhaps the oak tree causing all that leaf debris needs to be trimmed back. 

Let&#;s take a closer look at how you can manage your gutter system and what it will cost you. 

  • Gutter installation: It might be high time for a new gutter system. 
  • Gutter cleaning: Gutter guards don&#;t mean zero maintenance. You’ll still need to pay for the occasional cleaning. 
  • Downspout screens: This handy addition to your gutter system can help prevent heavy debris from clogging the downspout. 
  • Downspout extensions: Downspout extensions divert water flow from your home&#;s foundation. 
  • Tree trimming: Is a nearby tree’s leaves clogging up your gutters? The tree  likely just needs some TLC &#; and a haircut. 

Gutter removal and installation

If you need a new rain gutter system, chances are good that some existing gutters need removing. Plan to pay between $ and $ per linear foot for gutter removal and $4 to $ per linear foot for installing traditional gutters. 

Seamless gutters are a popular gutter system among homeowners, because seamless gutters are less likely to leak and clog than traditional gutters. A seamless gutter system tends to be more expensive, costing an average of $4 to $ per linear foot. 

Gutter cleaning

Remember, there are no leaf guards that eliminate gutter maintenance. If your gutter system is due for a cleaning, expect to pay between $ and $ for the job. 

Downspout screens

Downspout screens help prevent debris and small animals from entering the spout. As a result, your maintenance costs will go down. These money-savers are cheap, too, costing an average of $13 for a pack of 4 to 6 screens. 

Downspout extensions

Connecting a downspout extension at the bottom of your downspout helps divert stormwater from your home&#;s foundation. Otherwise, your home might become susceptible to flooding. Unsightly erosion also can occur if you don&#;t install a downspout extension. 

Downspout extensions typically cost $10 each

Tree trimming

Sometimes an overgrown tree’s leaves and branches can be the cause of your clogged gutters.

Keeping those long branches trimmed back and away from your home can help keep your gutters clean and prevent any safety hazards. On average, tree trimming costs $ to $ per tree

Gutter Guard Pros and Cons

Still on the fence about installing leaf guards around your home? Let&#;s go over the pros and cons of gutter guards in detail so you can better determine whether this investment is suitable for your home. 

Pros: 

✓ Less clogging and debris means you don&#;t have to clean your gutters as often. 
✓ Leaf guards prevent small animals from building nests in your gutters.
✓ Gutter guards can be added to most existing gutters.
✓ Less clogging means less stagnant water, which is a breeding ground for mosquitoes. 
✓ Gutter guards act as a gutter protection system by preventing water damage and debris buildup. 

Cons: 

✗ Some gutter guards are visible from the street, which may lower curb appeal.
✗ Gutter guards can dent or bend.
✗ Some gutter guards may cause a low-quality gutter system to sag.
✗ Even the best gutter guards won’t block all debris from getting into your gutter system. Small debris, like pine needles and sand, will often find its way through gutter guards.
✗ If your roof is steep, you may need to hire a professional to install the gutter guards properly. Otherwise, the water may overshoot and lead to water damage. 
✗ Gutter guards don&#;t typically increase home value, but leaf guards certainly can help preserve the structural integrity of your home.

DIY vs. Hiring a Professional

Depending on your skill level and your choice of gutter guards, installation can be a straightforward DIY home improvement project. 

Foam and brush gutter guards are the simplest to install –– simply slip the guard right inside the gutter. Other DIY-friendly gutter guards snap in place or slide under the roof shingles.  

Installation of some gutter guards, like gutter helmets, should be handled by a professional. Here’s why: Attempting to install specific gutter guards yourself may lead to costly mistakes, such as gutter overshoot. 

Remember that installing gutter guards will likely require the use of a ladder, so be sure you feel comfortable climbing one. If you&#;re working on your roof, always work with caution. 

Each gutter guard type has a distinct installation process. Contact the manufacturer for installation instructions for your specific gutter guard type, or refer to YouTube for visual instructions. 

Cost of Gutter Guards Across the U.S.

All costs listed in this leaf guard pricing guide are national averages. On a smaller scale, prices for materials and labor may vary depending on demand for gutter guard installation in your local market. 

For example, if demand is exceptionally low or high, contractors and manufacturers will adjust their rates accordingly. 

FAQs About Gutter Guards

1. Are gutter guards maintenance-free?

No, there is no such thing as a maintenance-free gutter guard. Gutter guards help reduce the number of routine gutter cleanings, but leaf guards won’t  eliminate maintenance. 

2. Are gutter guards worth it?

Gutter guards are helpful for gutter systems that frequently clog and require several cleanings. If you find yourself paying too much for gutter cleanings, then installing gutter guards might be worth the cost. Gutter guards can pay for themselves over a few years. 

3. How long do gutter guards last?

How long your gutter guard system will last depends on its type and how well it&#;s maintained. Severe weather conditions also can affect how long your gutter guards will last.

Many gutter guard types last between 10 and 20 years, such as aluminum perforated covers and gutter helmets. Other gutter guard types last much less than 10 years, such as plastic PVC screens and brush guards. 

Conclusion 

Gutter guards can serve a great purpose for your home. Snap-on gutter guards make easy DIY projects, while gutter guards fastened with screws or bolts might take a bit more skill. 

Want to skip installing your gutter guards? Hire a professional to install the leaf guards for you. You can enjoy your weekend instead.

Why not hand over your whole to-do list? Mulching, mowing, fertilizing –– leave it to the professionals. Call up a local lawn care professional near you, so you don&#;t have to break a sweat. 

Remember, the typical cost to install gutter guards around an average home is $1,, with a range between $ and $1, (or between $ and $ per linear foot).

Small-scale gutter guard installation projects with low-cost materials average around $, while installing large-scale, high-quality leaf guards will cost most homeowners $4,.

Main Photo Credit: Ethoseo / Wikimedia Commons / CC BY

Jane Purnell

Jane Purnell

Jane Purnell is a freelance writer and actor in New York City. She earned her B.A. from the University of Virginia and enjoys a warm cup of French press coffee.

Posts by Jane Purnell

Sours: https://www.lawnstarter.com/blog/cost/leaf-guards-gutter-guards-price/

How Much Do Leaf Filters or Gutter Guards Cost to Install?

Cost to Install Gutter Guards

Gutter guards cost $ to $ per foot for only the materials. If you purchase your own gutter covers, hiring a handyman to install them costs $ to $ per foot. When hiring a full-service gutter guard company to install complex leaf guards, expect to spend $ to $ per foot.

Average Cost of Gutter Guards Chart

National Average Cost $1,
Minimum Cost $
Maximum Cost $4,
Average Range $ to $1,

Most water problems stem from ineffective gutters and downspouts, which can cause damage to your home’s foundation. Installing gutter guards is worth it to keep falling debris and leaves out of your gutters and reduce your need to clean them out by up to 66%.

Low-cost DIY covers are available at $1 to $3 per foot, but the higher-end gutter guards are the most effective and come with professional installation.

Cost To Install Gutter Guards By Type Chart

TypeAverage Cost To Install
Plastic Screen$ – $
Vinyl Grid$ – $
Aluminum Perforated$ – $
Steel Screen$ – $
Metal Mesh Screens$ – $
Solid-Surface (Helmets)$ – $
Micro-Mesh Screens$ – $1,
Full Surface Tension Covers$ – $1,
Foam Inserts$1, – $1,
Gutter Brushes$1, – $1,

*Table based on an average home with to feet of gutters.

Table of Contents

  1. Cost to Install Gutter Guards
  2. Gutter Guard Costs Per Foot
  3. Best Gutter Guards By Brand
  4. Cost Factors To Install Gutter Covers
  5. Gutter Protection System Accessories
  6. Seamless Gutters with Leaf Guard
  7. Are Gutter Guards Worth It?
  8. DIY Gutter Guards
  9. Free Gutter Guard Estimates
  10. Gutter Installation Near Me

Gutter guards cost between $ and $ per foot depending on the type of material—mesh, micro-mesh, foam, solid, reverse curve, or brush being the main choices. Each style has a different level of effectiveness, and typically the more expensive covers are the most effective.

Gutter Guard Cost Per Foot Chart

TypeCost Per Foot
Plastic PVC Screens$ – $
Aluminum Perforated$ – $
Vinyl Grid$ – $
Solid-Surface (Helmets)$ – $
Steel Screens$ – $
Metal Mesh Screens$ – $
Micro-Mesh Screens$ – $
Foam Inserts$ – $
Full Surface Tension Covers$ – $
Gutter Brushes$ – $

To calculate the linear feet of your gutters, measure the perimeter of your roofline.

The best gutter guards will manage to keep out roof debris, handle any amount of rainfall, not damage the roof during installation, and be an excellent long-term investment. Let's go over each type in detail.

Get free quotes from Gutter pros near you.View pros

Plastic PVC Screen Gutter Guards

Plastic PVC screens or vinyl grids are the cheapest at $ to $ per foot, but are also the lowest quality. The flexible plastic guards lay above the gutters or are tucked under the drip edge without any fasteners. Theses screens can be cut to any size and come in widths of 5” to 7” with lengths ranging from 15’ to 30’.

ProsCons
  • Easy to DIY install; snaps into place
  • Inexpensive
  • Doesn’t rust
  • Easy to cut
  • Not designed for a long life
  • The spiky pieces trap leaves and debris causing the problem of clogs that you’re trying to get rid of.
  • Can blow out of the gutter during heavy wind storms
  • Can bend and warp in the heat, and UV light can damage them.
  • The ice and snow in northern climates tend to collapse them.
  • Best for – Both needles and leaves.
  • Durability – May need replacement after 3 to 6 years based on climate.

Flat Plastic PVC Screen Gutter Guards Installed

Full Surface Tension Covers & Gutter Helmets

Full surface tension covers and gutter helmets cost between $ and $ per foot. These guards are made from a solid piece of metal that covers the entire gutter. An engineered outside edge curves downward between the guard and the gutter. Water flows around the curve through surface tension and gets drained away, whereas most debris will glide right over the edge.

Small debris and seeds will slowly accumulate within the gap between the helmet and the front lip of the gutter, which requires occasional gutter cleaning. Also, heavy rain can skip right over the helmet, especially with a steep roof pitch, and fall straight to the ground causing damage.

ProsCons
  • Works well with leaves and other large debris
  • Prevents anything from falling into the gutters
  • Lets water flow unobstructed
  • Expensive – brand names usually costing $20 – $30 installed
  • Can have a hard time handling a severe rainfall, so water overshoots the gutters.
  • May not work on steel, tile, slate, or wood roofs.
  • Best for – Must be installed in a similar angle as the roof and works best with roofs with a mild or moderate slope.
  • Durability – Lasts 10 to 20 years with some top brands offering a lifetime warranty.

Perforated Aluminum Covers

Perforated aluminum gutter covers cost $ to $ per foot and come in 4’ to 8’ pieces. The perforations allow for easily installing fasteners to the fascia. Aluminum guards provide the best value, lasting 10 to 20 years, are fairly priced, and come highly recommend from professional installers.

ProsCons
  • Available and inexpensive
  • Covers are easy to remove and clean.
  • Stronger and more durable than plastic screens
  • Don’t become brittle, warp, rust, or bend
  • Available in many colors
  • Leaves lie on top of the covers.
  • The large holes allow small particles into the gutter.
  • Prone to dents
  • Best for – Works in all climates and debris types.
  • Durability – Last between 10 and 20 years. Some companies offer a limited lifetime warranty.

Steel Screens

Steel screens for gutter protection cost $ to $ per foot and are more durable than PVC of aluminum. These screens come in 5” to 7” widths with pre-cut pieces 4’ to 10’ long. Avoid tucking these screens under the first layer of shingles. Tucking any guard may void your shingle warranty and exposes the roof decking to heavy rain.

ProsCons
  • Inexpensive
  • Available in short sections (easy to handle)
  • Easy to install by clipping on to the outer lip of the gutter
  • The mesh size is large enough to catch small debris.
  • Not good under trees
  • Best for – Works with various types of roof: steel, slate, wood, tile, or shingles. Also works with old, brittle shingles.
  • Durability – Last 5 to 10 years before rusting on average. If powder-coated, expect an additional 5 to 10 years of longevity. Some high-end brands offer a limited lifetime warranty.

Steel Mesh Screen Gutter Cover Blocking Leaves

Metal Mesh Screens

Metal mesh gutter guards cost $ to $ per foot and come in stainless steel or aluminum. Similar to helmets, metal mesh screens keep out most debris but has trouble with small seeds slipping through and heavy rainfall skipping over the mesh.

ProsCons
  • The small mesh keeps out almost all debris.
  • Some come with self-locking clips for easy installation.
  • The small mesh can keep out heavier rainfall.
  • Not small enough, as some debris still gets in.
  • During testing, some parts collapsed.
  • Ice and snow can collect on the top, causing ice dams and too much weight on the gutter.
  • Best for – Works with various types of roof: steel, slate, wood, tile, or shingles. Also works with old, brittle shingles.
  • Durability – Last 5 to 10 years depending on if the metal is powder-coated.

Curved Metal Mesh Gutter Guard With powder-coated protection

Micro Mesh Gutter Guards

Micro-screen covers are one of the most effective guards against debris and cost $2 to $3 per linear foot on average. These screens are typically made from a metal frame that's covered by a fine wire mesh, then powder-coated for protection. Some brands will require professional installation.

ProsCons
  • Keeps out almost every single thing—to the size of sand particles
  • Copper in certain micro-mesh products helps break down moss, algae, and lichen.
  • Not suitable for DIY
  • Holes are so small that water skates across the top unless they have touchpoints underneath.
  • Tiny granules, decaying leaves, roof asphalt, moss, and tree sap still clog this micro-mesh.
  • Icicles can form on the screens in winter.
  • Best for – Houses sitting under pine trees. Warmer climates. Works with various types of roof: steel, slate, wood, tile, or shingles. Also works with old, brittle shingles.
  • Durability – Will last 5 to 10 years depending on the material. Tend to become damaged/dented over time.

Foam Inserts Gutter Guards

Foam inserts gutter guards cost $2 to $6 per foot. The foam wedges are typically made from polyurethane which are 5” wide and 8’ long. The foam allows water to filter through while preventing debris and leaves from entering the gutter system.

ProsCons
  • Durable and long-lasting
  • Can handle direct sunlight without drying or falling apart
  • Include a germicide to discourage bacterial growth
  • Lightweight
  • Easy to install or remove. Can be cut to fit easily
  • Allows a smooth flow of water around them
  • Stops mosquitoes breeding in gutters
  • Invisible from the ground
  • Doesn’t keep out debris, so gutters still need to be cleaned
  • Can freeze in cold weather, disrupting water flow
  • Foam could encourage moss growth.
  • More expensive than many other options
  • Best for – Mild to moderate climates.
  • Durability – Lasts 2 to 5 years in sunny and wet climates and up to 10 years in temperate climates. Some brands include a limited 20 to year warranty.

Gutter Brushes Cost

Gutter brushes cost $ to $ per foot on average. The guards are built from twisted wire or a steel rod with bristles designed to allow water to pass while blocking debris from entering. Gutter brushes will need to be removed and cleaned periodically, and professional installers do not recommended them.

ProsCons
  • Cheap
  • Easy to install
  • Allow good water flow
  • Don’t add weight to gutters
  • Keep out birds and rodents
  • The brushes don’t allow all debris to be removed
  • Can restrict water flow when clogged with leaves
  • Brushes have to be removed and shaken of debris regularly
  • Not a long-term solution
  • Best for – Mild to moderate climates.
  • Durability – Designed to last 5 years, with proper care.

Gutter Brushes Installed In Aluminum Gutter System

Talk to gutter guard pros in your area.View pros

Return to Top

Best Gutter Guards By Brand

The best gutter guards are Leaf Filter, LeafGuard, and Gutter Helmet—they are the most expensive, but also the most effective. Choosing the best leaf guards for gutter protection depends on your roof, location, climate, and the amount of debris, rainfall, snow, and freezing temps that occur.

BrandTypeMaterials Cost Per FootInstalled Cost Per Foot
EasyOnMicro-mesh$ – $$ – $
GuttergloveMicro screen$$
Leaf ReliefPerforated$$
RaindropPerforated$$
Englert MicroguardMicro-mesh$$6 – $7
LeafGuardOne-piece gutter system$ – $$ – $
RhinoMicro-mesh$12 – $17$15 – $20
Gutter HelmetCovered$$
Leaf FilterMesh$15 – $39$18 – $42
MastershieldMicro-mesh$17$20
ValorMeshEstimate on request
K-GuardOne-piece gutter systemEstimate on request
BulldogPerforatedEstimate on request

Leaf Filter Cost

Leaf Filter gutter guards cost $17 to $43 per foot on average for materials and installation. Leaf Filter gutter protection for a home with to linear feet of gutters costs $2, to $6, for professional installation.

ItemCost Per FootSubtotal Cost
Materials$15 – $39$2, – $5,
Labor$2 – $4$ – $
Total Cost$17 – $43$2, – $6,

Leaf Filter has a surgical-grade steel mesh of μ over a uPVC frame that is scientifically designed to keep everything out of your gutters except water. The vinyl will expand and contract in hot and cool weather, so it can warp over time, even if it’s screwed in place.

They are not installed under the roof shingle but have a built-in degree pitch to help debris fall off. Leaf Filter guards can only be installed by a professional.

LeafGuard Cost

LeafGuard gutters cost $11 to $37 per foot on average for materials and installation. A Beldon LeafGuard gutter system for a home with to linear feet of gutters costs $2, to $7, for professional installation.

ItemCost Per FootSubtotal Cost
Materials$9 – $33$1, – $6,
Labor$2 – $4$ – $
Total Cost$11 – $37$2, – $7,

Beldon LeafGuard is a one-piece gutter system that's 20% thicker than the industry standard. Leaf Guard is designed to hold large amounts of water and boasts complete elimination of debris. It’s available in different shades of white, tan, gray, and red.

ComparisonLeaf FilterLeafGuard
MaterialsSteel and VinylAluminum
MethodMicro-mesh FilterReverse Curve
InstallationSnap-onComplete Gutter System
Installed Cost (LF)$17 – $43$11 – $37
Rating/5/5

Gutter Helmet Cost

Gutter Helmet costs $ to $ per foot on average for materials and installation. A Gutter Helmet system for a home with to linear feet of gutters costs $2, to $3, for professional installation.

ItemCost Per FootSubtotal Cost
Materials$$2, – $2,
Labor$2 – $4$ – $
Total Cost$ – $$2, – $3,

Gutter Helmet has a triple lifetime warranty on their products, one of them being a no-clog performance warranty. With its nose-forward design and ribbed surface, it’s good at handling large amounts of water and snow.

ComparisonGutter HelmetLeafGuard
MaterialsAluminumAluminum
MethodReverse CurveReverse Curve
InstallationWith BracketsComplete Gutter System
Installed Cost (LF)$ – $$11 – $37
Rating/5/5

Valor Gutter Guard Pricing

Valor gutter guards are made of stainless steel micro-mesh crimped to a galvanized steel frame. Pricing is available upon request. Water goes through the mesh and then through louvered steel into the gutters. They capture all the water flowing into the gutter due to the elevated S bends in the mesh, which forces the water to slow down and change direction. They also prevent debris from entering them and are pitched to the angle of the roof.

Rhino Gutter Guard Cost Per Foot

Rhino gutter guards cost $14 to $21 per foot on average for materials and installation. A Rhino gutter system for a home with to linear feet of gutters costs $2, to $4, for professional installation.

ItemCost Per FootSubtotal Cost
Materials$12 – $17$2, – $2,
Labor$2 – $4$ – $
Total Cost$14 – $21$2, – $4,

Rhino makes surgical stainless steel micro-mesh gutter guards that can handle 60 gallons per minute of water volume. They also sell miters that can catch increased water streams from various roof spots and distribute it more evenly into the gutter system.

Rhino guards don’t go under the shingle, but they can only be installed by trained professionals. Their guard carries a year no-clog warranty and works best with shallow-sloped roofs.

Consult with a Gutter pro on the best brands.View pros

Leaf Relief Cost

Leaf Relief installation costs $ to $ per foot on average, including materials. A Leaf Relief system for a home with to linear feet of gutters costs $ to $1, for professional installation.

ItemCost Per FootSubtotal Cost
Materials$$ – $
Labor$2 – $4$ – $
Total Cost$ – $$ – $1,

Leaf Relief guards are made from heavy-duty aluminum or copper and are attached to the gutter only. The guard is flat and perforated and can drain ” of rainfall per hour. It has a vinyl flap, and it’s treated to resist UV light and extreme weather. There are four options within the Leaf Relief category—adjustable, classic, half-round, and zip.

Mastershield Gutter Guard Cost

Mastershield gutter guards cost $19 to $21 per foot on average for materials and installation. A Mastershield gutter system for a home with to linear feet of gutters costs $2, to $3, for professional installation.

ItemCost Per FootSubtotal Cost
Materials$17$2,
Labor$2 – $4$ – $
Total Cost$19 – $21$2, – $3,

Mastershield gutter guards are made from a stainless steel micro-mesh that is interwoven with copper wire, and it keeps out all debris larger than 50μ. Under the mesh is steel with multiple touchpoints to draw in the water. The wire keeps oils and organisms off the gutters and guards.

The MasterShield system must be installed professionally, and needs to be installed at the right angle to achieve what is promised, which often requires that the existing gutters be lowered to accommodate the installation. The cost can occasionally go up to $28 per linear foot if the root slope is extreme or if the house has multiple stories.

K-Guard Gutter Cost

K-Guard will give price estimates on request. K-Guard has been called the most attractive gutter system available. They integrate the gutter with the cover to form a seamless, all-in-one system which is screwed to the fascia board and rafter tails. The system can withstand virtually any weather condition and can handle 22 inches of rain per hour.

Gutterglove Cost Per Foot

Gutterglove costs $3 to $8 per foot for materials and installation. Homeowners choosing the Gutterglove Pro report spending $2, to $3, on having it installed professionally.

ItemCost Per FootSubtotal Cost
Materials$ – $$ – $
Labor$2 – $4$ – $
Total Cost$ – $$ – $1,

The Gutterglove micro screen is the toughest money can buy—tough enough to be used by the Navy and popular with rain harvesters due to its UL certification. Made with an anodized steel frame, they have four main categories for the guards—Pro, Ultra, LeafBlaster, and LeafBlaster PRO.

Raindrop Gutter Guards Cost

Raindrop gutter guards are made from a polypropylene blend combined with UV stabilizers. This blend stands up to the fiercest storms and very hot and cold climates. Raindrop has a system of guards, end caps, miters, wide mouth outlets, downspout clean-outs, heat cables, and rain barrels available.

ItemCost Per FootSubtotal Cost
Materials$$
Labor$2 – $4$ – $
Total Cost$ – $$ – $1,

EasyOn Gutter Guard Prices

EasyOn is a stainless steel filtration system using micro-mesh that’s made by Gutterglove. It will filter out leaves, pine needles, and even sand. It installs 30% faster than other brands and can be taped or screwed on to any gutter. It works with any roof type.

ItemCost Per FootSubtotal Cost
Materials$ – $$ – $
Labor$2 – $4$ – $
Total Cost$ – $$ – $1,

Other Top Leaf Guard Gutters & Costs

BrandTypeMaterials Cost Per FootInstalled Cost Per Foot
AmerimaxPlastic Perforated$$
UltimateCovered$$
ShurFloPerforated$$
SureguardAluminum Perforated$$
LeafproofCovered$$
ProguardCovered Mesh$$
Gutter ProCovered$$
LeaFreeCovered$$
LeafxCovered$$
XtremeMesh$$
WaterloovCovered$$
Gutter TopperCovered
Mesh
Heated Cover
$$
ByersCovered$$
ChampionMeshEstimate on request
Gutter CapCoveredEstimate on request
Gutter ShutterCoveredEstimate on request
SpringrockPerforated
Mesh
Estimate on request

Bulldog Gutter Guards

Bulldog gutter guards are made from 98% recycled guage aluminum with a ribbed design rather than flat to encourage debris to lift off. They can handle 14” of rain an hour. Their unique front and back attachment makes the entire gutter system stronger. Screens are screwed to the gutters and fascia board. Bulldog guards are available in white and dark bronze and can be installed on 5”, 6”, or 7” gutters.

Gutter Shutter Cost

This is a gutter system, not just a gutter guard. The grade aluminum has a perforated hood to let rain through. It is seamless and clog-free, with a high-back gutter trough, and it’s guaranteed never to pull away from the house after installation.

Gutter Topper Cost

Gutter Topper offers several different kinds of gutter guard. Professionally installed Gutter Topper systems cost $23 per linear foot.

  • Gutter Topper: Covered - a surface tension system for houses under deciduous trees
  • The Leaf Terminator: Perforated - for houses under deciduous trees
  • The Solution: Mesh - for houses under deciduous trees and in harsh weather conditions
  • Needle Guard: Mesh - for houses under coniferous trees
  • Versatile Solution: Covered - has an optional heat cable available
  • Top Guard: Covered - keeps leaves out of gutters, diverts rainwater, and has an option for a heat cable

Leafless Gutters Cost

Leafless gutter guards cost $ per linear foot and $ per linear foot installed. They are good for a DIY project and made from corrugated aluminum.

Waterloov Gutter Guards Cost

Waterloov costs $ per linear foot or $20 per linear foot installed. They have two rows of louvers running along the front length of the gutter guard that allow all rainwater into the gutter.

ShurFlo Gutter Guard Costs

Shurflo gutter guard costs $ per linear foot or $ per linear foot installed. The Shurflo Gutter Guard is made of perforated aluminum and has a patented angle that prevents leaves and debris from collecting in the gutters. It does not go under the shingles and can be installed on 5” or 6” gutters.

Gutter Pro

Gutter Pro is a helmet type of guard that channels rainwater into the gutter. It costs $ – $ per linear footinstalled. It boasts a patented bracket system that is very strong, making it one of the most dependable gutter guard systems available.

Leafx Gutter Guards Cost

Leafx gutter covers cost $ per linear foot, $16 per linear foot installed. It is a gutter protection system made from guage aluminum that comes in many colors. It doesn’t require drilling into the fascia or roof. It has a nose-forward cover with ridges which force the water to sheet rather than stream.

LeaFree Gutter Guards Cost

LeafFree gutter guards cost $10 per linear foot or $ per linear foot installed. They are able to handle in excess of 14” of rainfall per hour, with their design specialized for high rainfall areas of the country. Panels are screwed into the lip of the gutter, not the fascia or roof. Guards are made of guage aluminum. They have a nose-forward design with a preset opening and come in 15 colors.

Gutter Cap Cost

Gutter Cap gives prices estimates on request. Their gutter guard system uses a water surface tension technology to direct rainwater into the gutter, while leaves and other debris fall off the roof without entering the gutter. Installed as a shingle extension, they have a nose-forward design with a preset opening

Leafproof Gutters Cost

Leafproof costs $ per linear foot or $ per linear foot installed. This is a guage aluminum gutter cap that uses surface tension to direct the rainwater. It’s installed under the first row of shingles and has an S-bend, nose-forward, hard-cover design, channeling water into the gutter opening.

Xtreme Gutter Guards

Xtreme gutter guards are an embossed micro-mesh type over expanded aluminum which turns gutters into a closed unit. They cost $ per linear foot or $ per linear foot installed. They don’t sag or separate.

Return to Top

Cost Factors To Install Gutter Covers

Labor Costs

The average labor cost to install gutter covers is $3 per foot with most homeowners spending $ to $ per foot. An average-sized home uses feet of gutter guards which takes a professional about 3 hours to install and costs about $.

LengthLabor TimeAverage Cost
50 FT1 Hour$
FT2 Hours$
FT3 Hours$
FT4 Hours$

A professional will most likely have a connection with a particular rain gutter manufacturer and will be trained for the best methods of installing their products.

Get free estimates from gutter professionals.View pros

Gutter Materials: Aluminum vs. Steel

The most common types of gutter guards to install are aluminum and galvanized steel. Aluminum is the go-to choice among most contractors based on their price and durability.

AluminumSteel
Weigh almost 2/3 less than steel gutter guards.Once they are full of water or snow and ice, the weight could pull them off the house.
Dent easilyHarder and resistant to dings
Conduct heat betterStronger
Easier to cut during installationHarder to cut

Snap-On vs. Screw-On Gutter Guards

Different cover types may require a more complicated installation process which increases the price. Both snap-on and screw-on gutter guards have their benefits and disadvantages.

  • Snap-on gutter guards are easy to install and remove.
  • Screw-on gutter guards will last longer but are harder and more expensive to install. Debris can get caught on the screw heads.

Home Height & Accessibility

Installing gutter guards on a home higher than a single-story costs more and requires a professional who is experienced working on roofs. Add $1 to $ per linear foot for each additional story. Consider only adding gutter guards to the second story and above.

Gutter guards can be installed on gutters on any building such as barns, garages, and outbuildings. Difficult access to the building can increase the cost.

Roof Configuration & Type

The installation of gutter guards will cost more if you have multiple rooflines with degree bends or a steeply pitched roof. Flat or shallow roofs are safer to work on, and the cost to install gutter guards isn’t as high.

Location & Climate

Urban areas have a higher cost of living, and this is reflected in the cost of installation. Also, the type of gutter guard you need will affect the end cost, as homes in colder climates need gutters and screens that can withstand the weight of snow and ice buildup.

Return to Top

Gutter Protection System Accessories

Heated Gutter Guards Cost

Heated gutter guards cost $10 to $15 per foot installed which consists of a heating cable the prevents snow and ice dams from forming. Heat tape is another option at $77 per feet, which is a waterproof cord you lay inside the gutter and plug it in. Be sure to choose self-regulating cables.

Downspout Screens

Screens in your downspout can keep them free of leaves and debris that might otherwise collect and clog the drain. Usually made of aluminum, steel, stainless steel, or copper, a downspout screen costs about $5 each. It sits in the downspout with no need for fasteners. Plastic screens or filters are also sold at the same price.

Contractor Installing Down Spout Filter on Gutter System

Instead of screens, some homeowners have found that increasing the width of their downspouts can allow a lot of the smaller debris that's not caught by the guards to flow out.

Downspout Extensions

Downspout extensions cost $8 to $15 per linear foot and are easy to install yourself. The downspout directs the water from gutters away from the home's foundation. Solid or flexible and usually made of vinyl, you can attach extensions to direct the water to dry places like a garden. One type even rolls itself back up once the water rush is over.

Gutter Cleaning

With gutter covers, you can save money by having to clean them a fraction of the time. Gutters without screens need cleaning at least twice a year during the spring and fall seasons. Gutter cleaning costs$75 to $ each time depending on the size and stories of your home. Keeping gutters clear of debris will prevent them from clogging, overflowing, and helps them maintain their durability.

Return to Top

Cost of Seamless Gutters with Leaf Guard

Leafguard and Kguard, make a single system unit of gutter plus gutter guard. The gutter is all one piece with just a small opening for water that keeps out leaves and debris. Seamless gutters with Leaf Guard built-in cost $30 to $60 per foot installed. They are more attractive on your home since they are one piece and one color.

MaterialCost Per FootAverage Price Installed
Vinyl$$4, – $6,
Coated Steel$$4, – $6,
Aluminum$$5, – $7,
Copper$$8, – $11,

Return to Top

Are Gutter Guards Worth It?

Gutter guards are typically worth it for homes under constant attack from leaves and debris where gutters need to be cleaned twice a year. Gutter covers drastically cut down on the number of times you need to clean and typically pay for themselves after five years.

However, gutter guards come with an upfront cost of $ to $1,. Compare the annual $ to $ gutter cleaning cost to the total cost of installing leaf guards to see if it’s worth it for you.

GuardsNo Guards
Installation$1, @ $6 SF$0
Cleaning$ every 2 years$ per year
Total Cost After 5 Yrs.$1,$1,
Total Cost After 10 Yrs.$1,$2,

Gutter guards reduce the frequency of gutter cleaning, but they won't completely eliminate it, no matter what the warranty implies.

Pros and Cons of Gutter Guards

There are many advantages and disadvantages of installing gutter guards to consider.

Pros

  • Having them makes it easier to clean your gutters.
  • No birds’ nests or other animals can make homes in your gutters.
  • Guards can be added to most existing gutters.
  • There’s no need to clean gutters frequently.
  • They keep water from building up in the gutter, which turns into stagnant water—a breeding ground for mosquitoes.
  • They can help the gutters to last longer since debris sitting in gutters can cause rust or erosion.
  • Heated gutter guards keep snow and ice from building up—ice and snowbanks create a heavy load and could damage the gutters.

Cons

  1. Some gutter guards, such as foam, can prevent moisture from escaping, which can cause mold or mildew problems.
  2. Some gutter guards, when combined with a cheaper gutter, might cause the gutter to sag and weaken due to the additional weight of the gutter guard.
  3. Gutter guards do not block % of the debris that falls on a house.
  4. The gutter will still need to be cleaned, just not nearly as often.
  5. There is not always a good return on investment (ROI). There's no guarantee that adding gutter guards will add value to your home.
  6. Installation can be expensive.
  7. Tree seeds can get caught in the gutter and sprout trees.

What Are Gutter Guards?

Gutter guards protect your gutters from filling up and causing clogs inside the gutters, which could create water damage problems in your home, and ice buildup and mosquito infestations in your gutters. The guards make sure the water runoff from the roof flows freely and drains properly.

Do Gutter Guards Really Work?

Gutter guards are effective to a certain point, and the type and brand you install will certainly play a significant role in their effectiveness. They will prevent most of the larger debris from collecting in your gutters, but they will not keep them pristinely clean.

Small debris can slip in through mesh guards—items such as pine needles, petals, buds, and floating dust. However, the small pieces will take longer to accumulate, and the gutters will not need cleaning as often.

Return to Top

DIY Gutter Guards

Installing your own gutter guards can take a full 1 to 2 days, depending on the type you purchase. Some gutter guards (the most expensive kind) need to be installed by trained and certified professionals, and manufacturers won’t sell them to you directly. Working on a ladder can be dangerous, so be sure you're up for the challenge.

How to Install Gutter Guards

Many YouTube videos teach you how to install gutter guards, depending on the type. The easiest kind to install is the snap-on, one-size-fits-all gutter guard. They require no tools besides cutting. Some gutter guards simply lie inside the gutter, such as foam or brushes. These just need to be cut to size.

Some gutter guards fit over the top of the gutters and are attached by screws, nails, or rivets. Another kind of gutter guard is held in place by the roof's shingles and fastened at the front edge of the gutter.

Before purchasing our gutter guards, make sure the type fits your particular gutter width.

Main Tools Needed

  • Box cutters, utility knife, or tin snips
  • Screwdriver or power drill
  • Miter box
  • Self-tapping sheet metal screws

Guard Type

  1. Snap-On Guards – Slide guard between the shingle and underlay on the roof. You might need to loosen the space with a putty knife. If you crack a shingle, fix it with roofing putty. Clip the other side of the guard onto the outer edge of the gutter. Overlap the sections by ½”. Add miter joints to corners.
  2. Screw-Fastened Guards – Install brackets according to instruction with screws and some caulk around the heads to keep it waterproof. Slide guard under shingle layer and above underlay, if required. Attach the other side of the guard to the brackets or gutter lip with screws, and caulk screw heads. Add miter joints to corners.

Return to Top

Free Gutter Guard Estimates

When installing gutter guards, always get at least three free estimates from referrals or websites like HomeGuide and Google. Hiring a gutter installer is like hiring any other home improvement contractor to work in your home. Make sure they have the following:

  • Insurance: General liability insurance.
  • Guarantee: Look for a guarantee on their work and materials.
  • Reviews/Ratings: Look for good ratings/reviews on HomeGuide and Google.
  • Brand: If a pro recommends using a specific brand, be sure to look up the gutter guard reviews before proceeding.
  • Upfront Costs: A verbal and written proposal for how much the job will cost.
  • Quality Materials: Make sure the are not using leftovers from their last job.
  • Experience: Look for at least five years’ of experience installing your type of gutter guard.

Get free estimates on HomeGuide from trusted gutter guard installation companies:

Get free estimates

Sours: https://homeguide.com/costs/gutter-guards-cost

Installation cost guard leaf

He looked at his watch. - When are you going home. - Yes, Im a day off. What about. - Never mind.

Best and Worst Gutter Guards from Lowes, Home Depot, Menards /@Roofing Insights

She definitely did not want to return home. She didn't want to see her mother. And in general, this house was for her a symbol of that old life in which the new Marina had no place. She walked along the night Sadovaya and cried bitterly.

You will also be interested:

And I decided to masturbate right here and now. I had a vibrator at home, but I had a replacement - a bottle of shower gel. Putting a condom on her (I always have a few with me), I began to put my pussy on her. Oh my God, what a thrill !!.



1631 1632 1633 1634 1635