Laminate floor end molding

Laminate floor end molding DEFAULT

Why They Are Required

Transition strips are necessary for a variety of reasons, for example: (1) To terminate one flooring next to another type of flooring - such as in a doorway from a hardwood floor in one room to carpet in another room. (2) To change directions of plank flooring such as in an L-shaped hallway. (3) To terminate flooring next to walls, fireplaces and exterior doors. (4) To terminate the floor at a level change such as a step. Common to all these reasons, is the necessity to cover the expansion gap that most floors require along the entire perimeter. There are various shapes and they are pictured and described below.

Buy transitions with our 18,000+ item Transition Strip Finder 

We have over 18,000 flooring transitions which are color coordinated with 40+ brands of Laminate, Cork, Hardwood and Vinyl (LVP, LVT, WPC, SPC). Brands like Armstrong, Forbo Marmoleum, Karndean, Mannington, Mohawk, Shaw and more. Moldings include Stair Nose, Reducer, End Cap, T-Molding, Threshold, Base Shoe and Multi-Function.

Note: The images/illustrations shown below are descriptive only. The actual shape will vary  by manufacturer.

wall base for floating floorsWall Base  (a.k.a. Baseboard)

Baseboard or Wall Base is used to cover the expansion gap along the perimeter walls. It can be any shape that pleases you aesthetically, as long as it is thick enough at the base to cover the required expansion gap.



quarter round moldingQuarter Round​ (a.k.a. Base Shoe, ¾-Round, Shoe Molding)

This has the same use as a Wall Base - to cover the expansion space along the perimeter. It is often used in tight spaces like the toe kick underneath kitchen cabinets.



t-moldingT-Molding (a.k.a. Expansion Molding)

The T-Molding is used as a bridge between two floors of approximately equal height. T-moldings are typically used in doorways without thresholds (with the same flooring on each side of the doorway) or in L-shaped rooms or hallways, when you want to change the direction of the planks.




hard surface reducerReducer

Reducers provide a transition to another floor with a lower height. For example, a Reducer would be used from a Hardwood Floor to bare concrete in a doorway leading to a garage.



carpet reducerEnd Cap (a.k.a. Square Nose, Threshold, Carpet Reducer)

End Caps are typically used at exterior doorways, around fireplace hearths, at sliding patio doors, at closet door tracks and next to carpeting.



overlap step nosing

Step Down (a.k.a Bull Nose, Stair Nose)

This molding creates an attractive threshold and provides the proper overhang for a transition from one floor level to another, such as a step into a sunken room or a landing.



VersaEdge Stair Nosing

The VersaEdge stair nosing is a unique and adaptable stair transition. VersaEdge works with a variety of floor thicknesses and can accommodate overlap, lock down or flush mount installation methods. It works equally well for an entire stairway (flush mount) or a single step like a sunken room or landing (overlap). 



Slim Trim Multi-Function

The Slim Trim is a low-profile multi-function transition strip that can work as a Reducer, T-molding or End Cap and is available for many brands.



5-in-1 Multi-Function (a.k.a. Incizio, InstaForm Profile)

This ingenious multi-function molding comes with a cutting tool which enables you to change it's shape into different varieties (T-molding, End Cap, Reducer, Carpet Threshold). Also, it can become a  Stair Nosing when combined with the stair base sub-profile. It is exclusive to Mohawk and Quick-Step flooring.



molding trackTrack

An optional plastic or metal channel that provides a secure attachment point for transitions.


A Guide to Laminate Flooring Moldings

Buying HelpBuying HelpBuying HelpFlooringFlooring AccessoriesLaminate FlooringMoldings & AccessoriesMoldings & Trim2

Looking for a simple way to make your new laminate floor seem like it’s always been a defining feature of your room? The proper molding can make a big difference by adding a little something extra to your flooring project.

laminate flooring moldings

One of the most important factors to consider regarding your interior décor is the degree of integration and harmony you wish to achieve among the various areas in your home or work space. In some settings, a sense of continuity may be desired between adjacent rooms. In others, you may want sharply contrasted areas. You might wish to create the illusion that your new flooring has always been a part of the living or working space in which it is installed. Even with a limited budget, you can create striking effects with a bit of imagination, and often the best way to get the desired effect is the simplest one.

For laminate flooring, something as basic as the right style of molding can make all the difference in adding flow and continuity, as well as a sense of unity to an interior. There are several varieties of laminate flooring moldings that are available to you to help you gain these effects. But, which variety is the most appropriate for your specific space? Let’s take a look at the options.

Laminate Flooring Moldings

Reducer Moldings

This type of molding is useful when applying a transition from one floor space to another where the levels are slightly different. This situation sometimes occurs when the transition is between two different flooring materials, for example from a laminate floor to a tile floor, or when the floor of the adjacent room is the same material but installed at a different level.

End Moldings

An end molding can be used as another type of transition molding, but it is more useful when the transition is to an uneven surface such as a high-pile carpet or a thicker variety of tile. An end molding may also be a better choice when your flooring butts an edge such as a sliding glass door, where a quarter round molding may be too small. With a lower profile than a reducer strip laminate molding, an end molding can add a subtle, tailored look to your interior.


T-moldings are useful for doorways or between other flooring sections which are at the same level. For example, if a laminate floor is installed in a particularly long room, a T-molding could be used for tying the two sections together. The T-molding is aptly named – shaped like a “T” – with the beams of the “T” serving as a bridge from one room or flooring section to another.

Baseboard Moldings

A baseboard is a well-known finishing element to a flooring project. The baseboard molding serves as a transition from a horizontal surface (e.g. your new laminate floor) to the vertical surface of a wall. Like all types of molding, you can match it with the color of the laminate floor, or paint it to match the wall. Either way, a baseboard molding can add a subtle, almost subliminal effect to the appearance of your room.

Base Shoe Moldings

This type of molding appears as a standard baseboard molding with a shallower profile. The base shoe molding is useful when trying to preserve the look of an existing baseboard while at the same time offering the advantages of its lower profile. The “shoe” portion of the molding is a rounded lip that helps to preserve the face of the baseboard from everyday wear, specifically when you vacuum your laminate floor.

Quarter Round Moldings

Used in the same way as a base shoe molding, the quarter round molding butts against your wall with a low, rounded exterior profile that adds a simple, yet tidy touch to your completed laminate flooring installation. This type of molding is often used behind cabinets where a low profile molding is better suited to support an object flush against the wall.

Stairnose Moldings

For making a transition from your floor to the edge of a flight of stairs or steps, a stairnose molding is a great solution. The molding sits flat and level on one side with your laminate flooring and closely hugs the first stair or step on the other side, rounding off the edge of the stair and adding a unique finishing touch to your completed laminate flooring project.

Something as simple as a molding can really make all the difference to the overall effect of your new laminate flooring project. Putting in laminate flooring moldings is often an afterthought to some, but the finished visual effect it creates is more often than not the defining feature of the completed project.

  1. Capstone logistics job application
  2. Lord last name origin
  3. Tv xfinity not working

It’s an accomplishment to finish a flooring installation, but there’s one more step to completing a new floor—the moldings and trim! The floor moldings provide coverage over expansion gaps and create a finished look around the edges of a room, both on the wall and transitioning to other rooms. Let’s explore the floor molding types and what you will need for your project. It’s much easier to order moldings, trim and transition pieces with your flooring, so deciding what you need first will help your install run smoothly.

Molding Type: Wall Base Molding

Floor Molding and Trim - Wall Base Molding

Wall base moldings are a nice decorative touch to add around the edges of your room. Covering the expansion gap, this molding style provides a sophisticated finish in a variety of colors to match your floor. Using glue or finishing nails, you can easily fasten this molding to the wall.

Wall Base Installation:

Molding Type: Quarter Round Molding

Molding Guide - Quarter Round Molding

Quarter round moldings are a versatile perimeter molding style that adds a finishing touch, while covering the expansion gap. Use this floor molding as an addition to a wall base, around cabinets and at the base of steps. Quarter round moldings can be color matched to your flooring for a uniform look.

Quarter Round Installation:

Molding Type: End Cap / Square Nose Molding

Molding Guide - End Cap MoldingAn end cap molding has several uses, such as transitioning from laminate to carpet, fireplaces and exterior doors. With one raised side, it caps off the flooring allowing protection from debris and damage.

End Cap Installation:

Molding Type: T-Molding

Moldings Guide - T-MoldingT-Moldings are used for even height surfaces. For rooms larger than 30 ft. long laminate installation, you will need to have a transition molding from any floating floor to stabilize the planks. T-moldings are also commonly used in doorways and hallway transitions.

T-Molding Installation:

Molding Type: Reducer Molding

Moldings Guide - Reducer Molding

Similar to an end cap, the reducer is molding that is sloped on one side to transition between floors of different heights. This molding slopes at the end creating a seamless transition from floor to floor.

Reducer Installation:

Molding Type: Stair Nose

Moldings Guide - Stair Nose Molding

With a laminate or hardwood installation on stairs, a stair nose molding perfectly caps the edge of the stairs for a decorative and functional look. It will create a smooth surface between the new flooring and stair edges.

Stair Nose Molding Installation:

Molding Type: Versa Edge Stair Nose

Moldings Guide - Versaedge

This is a stair nose molding from Versatrim that is a thinner, universal stair nose compatible for installations with any flooring type. This will create more of a streamlined look to your stairs, simply installing over where the two edges of flooring meet.

Versa Edge Stair Nose Installation:

Molding Type: Quick-Step Incizio 5-in-1 Molding

Moldings Guide - Quick-Step Incizio

Quick-Step’s revolutionary 5-in-1 moldings set comes with a slicer that can specifically cut the molding to your needs. It is able to mimic a t-molding, square nose, hard surface reduce, carpet reducer and stair nose.

Incizio 5-in-1 Installation:

Moldings Warranty Information

Some of our moldings come with warranties, so you can have peace of mind after your installation! You can view the detailed warranties by the links below.

Molding Warranties:

bestlaminate flooring moldings


If you've been asking: "Where can I find the trim pieces to coordinate with my new laminate floor?" you've come to the right place. Versatrim Inc.'s innovative approach to molding solutions and its ability to coordinate with most of the top colors in the laminate flooring industry have guided the company to the forefront as a leading manufacturer of laminate moldings. Versatrim provides flooring manufacturers, retailers, distributors, installers, and yes, even the end consumer with high quality transition moldings at reasonable prices. With coordinating laminate decors for big brand names like Shaw, Mohawk, Mannington, Quickstep, Karndean, Beau Flor, Armstrong, Bruce, Kronotex, Witex, Columbia, Pergo, and US Floors among others; Versatrim makes it easy to find first-rate coordinating molding for almost every laminate floor. Versatrim now offers a variety of solutions including vinyl moldings, LVT moldings, SPC moldings, WPC moldings, and laminate moldings. Versatrim’s list of profiles include three PVC moldings for LVT floors, Slim Trim, VersaEdge, Slim Cap, and their standard laminate T-moldings, Reducer, End Cap (Square Nose), Stair Nose (Bull Nose), Wall Base (Baseboard), Colonial Base, Quarter Round, Base Shoe (Shoe Mold) profiles. Versatrim takes the guesswork out of the equation by providing customers with color samples to ensure success of their flooring project. Versatrim makes it easy to find transition moldings and trim that coordinate with your new beautiful floor!

Image says FREE SAMPLES. You can order a free sample by clicking this buttonSours:

End laminate molding floor

Some had tears in their eyes, those who knew Martha well, or simply imagined themselves in her place. Ignoring anyone, Nell went upstairs and went to her room. She hid the box with the dress, the money Frank had paid, climbed onto the bed and curled up into a ball. A shiver went through her.

How to Install a T-molding - Glue Down

Out. It's just f ck, I dont remember such excitement in my whole life. panties.

You will also like:

Her mouth was busy with a kiss, someone's tongue circled around one nipple, and the other nipple was twisted between the thumb and forefinger. Jason, who was standing in front of her, broke the kiss and the black guy quickly took his place with his mouth. Jackie felt her skirt pulled up on her, and Jason grabbed the belt of her panties.

She pulled her hips off the table herself to help remove them.

8634 8635 8636 8637 8638