Scale 1/10th RC Car Trailer
1/10th trailer to fit 1/10th RC touring cars and some small RC crawlers. Tray dimension is 211 x 486mm.
It is cut so that it can be printed on a standard Prusa MK2/MK3 or larger bed, biggest part is 235 x 209mm.
Contains: framing kit, 2 parts rims with hubs, wheel guards, cantilever arm, leaf spring system, light holder and covers for 5mm leds, Wyllis style hook ... etc...
you need to provide: M4 thread rods and 8mm axle housing pipes, some wood boards (or anything you want to use as floor) as well as some M3 and M2 bolts, 8 off MR104 bearings (4x10x4mm), a 6mm drill bit stopper and the tires (rims are 48mm).
I have a few RC boat spares laying around so I used 2 RC boat M4 propeller shaft with their housing, 8mm pipe as wheel axles. You can make your own out of 8mm OD pipe and 4 mm thread rods, you will need to make some sort of sleeve so that the thread rod is held in the center of the housing. the housing length is 259mm, the shaft length is 274mm.
The standby wheel and its fork are coming from an old K7 tape player so I redrawed something similar that can be printed. Again I used RC boat prop shaft and housing as axle but M3 this time, there is a propeller drive dog on top of assembly on which the Handle wheel stand get glued on. You can probably make something more simple with just a M3 thread rod and the provided Stand Wheel Column part.
It need a 6mm drill bit stopper as collet to lock the wheel stand up or down. The stopper height should be 8mm. It uses a M5 bolt as grub screw, I drilled and tapped the screw head to add a handle.
I use slotted aluminum extrusions so as to put more fastening points along the wheel track and the yellow anchor points are frame hanger, I found both items from the local hardware store.
There is a printable hook provided, you can make one out of 4mm welding rod as I did but PLA strength should be plenty as long as you don't go down this ravine with full throttle!
Please make sure to post your Make and give it a like if you feel so. Many thanks.
Show moreShow lessSours: https://www.myminifactory.com/object/3d-print-scale-1-10th-rc-car-trailer-129666
1/8 Car Trailer for RC cars for 3DSETS cars
3D printed Car Trailer in 1/8scale for Landy and Rancher 4x4 by 3D sets
Trailer which can tow around 6 kg of weight and its own.
Fully 3D printed trailer with tires from FlexFillament equiped with position lights. For printing the frame you will need printer with 250x210mm print bed, otherwise, the main frame won't be possible to print.
This trailer can be used with Landy 4x4 and Rancher 4x4
The full build guide can be found under this link: https://docs.google.com/presentation/d/1uoGMzSwG7XUS19fG4-cDWEFC5OSaVV9C0YzsJY_JLSY/edit?usp=sharing
Follow my pages to be the first, who will get my following models!
3D printing settings
0,2 Quality/speed profile from Prusa Slicer.
3-4 perimeters for frame parts.
Printer with build plate of 250x210mm volume
3D printer file information
- Last update: 2021/01/11 at 07:38
- Publication date: 2020/12/21 at 21:40
Pimp My Trailer Project (Complete!)
Here is the new layout I found worked the best. The only modification I am going to make is moving the fridge / microwave to the back of the workbench so I'm more lined up with my tools:
The Haier A/C unit has been replaced by a Wynter 14,000 BTU. The Haier was capable of cooling 320 sqft., and the Wynter 550 to 700 sqft. The window attachment for the hoses with the Wynter is a lot more heavy duty and makes for easier snap in and out than the Haier. I'm very happy with its performance this weekend! The trailer stayed 68 degrees at the hottest point of the day (84), with a lot of opening and closing of the door.
The A/C vent install as pictured in the previous post below worked exactly like it should have.
The only modification I needed to make out there was to quiet the noise coming from my 9500 watt generator. Others around me were complaining about the noise. A couple of Canadian's who traveled from Ontario suggested I get some plywood, lean it up against the generator to deflect the noise, then park my car in front of it. The noise dropped a good 15 decibels and nobody complained the rest of the time there. A $15.00 fix for a sheet of plywood from Lowe's and not will be coming with me to future races.
All in all - I expect this to be my last post on the topic now that everything is working as it should. It was a fun build... in case you may be thinking about emulating such a thing, here is the costs I have into it:
$3,400.00 - Trailer (Hudson Trucks and Trailers - Poughkeepsie, NY)
$1,000.00 - Professional electrical install - (Mr. Electric of Queensbury, NY)
$ 100.00 - Track lighting (Lowe's)
$ 350.00 - E-Track tie down system w/ rings and hardware (Amazon)
$ 485.00 - A/C unit - 14,000 BTU Wynter (Amazon)
$ 140.00 - Samsung 32" Television (Best Buy)
$ 60.00 - Nintendo gaming system (Walmart)
$ 80.00 - Craftsman tool holders (wall mounts) - (Lowe's)
$ 15.00 - Crates for storage on wall (Amazon)
$ 75.00 - Construction of rolling RC workbench
$ 145.00 - Mini Fridge (Home Depot)
$ 50.00 - Microwave (Walmart)
$ 175.00 - 5'x2.5' Futon Couch (Amazon)
$ 60.00 - EZ Up (Dick's)
$ 85.00 - EZ Up for Generator (Amazon)
$ 30.00 - Wheel chucks (Harbor Freight)
$ 50.00 - Orange warning cones (Home Depot)
$ 150.00 - Portable Grill (Dick's)
$ 30.00 - Carpeting (Home Depot)
$ 10.00 - TV Shelf (Lowe's)
$ 7.00 - Step stool (Walmart)
$ 30.00 - Fire extinguisher & Alarm (Lowe's)
$ 15.00 - Stand up Fan (Walmart)
$ 15.00 - x2 small clip fans (Walmart)
$ 30.00 - Metal Peg Board for RC tools (Lowe's)
$ 20.00 - Peg board hooks and whatnot for organization (Lowe's)
$ 40.00 - Fold down shelf under workbench w/hinges for charging station (Lowe's)
$ 100.00 - Box of tie down straps (Amazon)
$ 100.00 - Non-Skid strips for ramp (Home Depot)
$ 85.00 - Exterior white & grey paint (Lowe's)
$ 100.00 - Self tapping 3/8 screws w/socket head (Home Depot)
$ 100.00 - Toy Hauler Rear Screen (for when ramp is open) - (Amazon)
$ 80.00 - Exterior intake and exhaust vents for A/C - (Lowe's)
$ 8.00 - Drain hose for A/C unit (Lowe's)
$ 12.00 - Liquid Nail & Silicone for installation of A/C vents & plate inside (Lowe's)
$ 20.00 - Package of LED 60 watt light bulbs (Lowe's)
$ 20.00 - Wall baskets for tool storage (Lowe's)
$ 40.00 - Adjustable jacks for trailer stabilization (Harbor Freight)
$ 1,012.00 - 9500 watt Westinghouse Generator w/remote start (Lowe's)
$ 100.00 - Misc items (small) that I'm probably forgetting.
$8,424.00 - Grand Total
And... everything has wheels on it for easy conversion into an open trailer for moving furniture, boxes, a motorcycle, you name it.
So that's it! I hope someone will find this post helpful to use as a blueprint to build their own compact work station. Thanks for following along everyone!
The packaging has to be kept since it contains important informations. It includes a cut list with a full bill of materials and welding tips. x 36in. Once you get rolling on this project, you will see for yourself how easy the design changes and customization can be. The suspension is a modular air bag trailing arm design. Beautiful rig! I’ve only spent two long weekends building this Trailer and throughly enjoying every moment. One of the standouts of this build is the lowboy trailer that Keith made from scrap plywood that is then covered with sheets of plasticard along with some aluminum channel down the sides. Model "Trailer Tr4 MkII” is build with LEGO® in scale 1:17,5 and motorized using LEGO® Power Functions. Darwin, Hi Darwin….. 3.8 out of 5 stars 4. Thanks! Change ), You are commenting using your Twitter account. CNC Trailers Tamiya Tractor Trucks Tamiya MFU Trailers Tamiya Trailers Alum. No I’m sorry I don’t. and I must say , they fit ! 6' x 14' Lowboy Trailer Plans Blueprints, Model 1214 5.0 out of 5 stars 1 #25. My trailers overhang a Tamiya truck’s dual wheels by .22″ on each side which is scale. What is cost and lead time for 53’ split axle wit tool boxes? All our models are designed around and with the RC Kit elements. This makes for a very neat and clean underside. Concave beam type, the plane of the cargo platform is concave and has the lowest load-bearing plane. Ages: 14 years and up. RCP's Scale Models and Accessories.http://rctruckandconstruction.com/forumdisplay.php?f=106 99. even thought there is the word out there that Wedico 1/16 scale Trailers do not match with Tamiya's 1/14 Semi-tractors , I got me the "Wedico Lowboy" and the "Wedico Drop-deck" . Hi Carlos, sorry I haven’t made any reefers or vans and don’t have any plans to do so at the present time, Thank you for asking though! 247. And it will be only shipped by UPS Global Air (3-5 days), there is also an extra shipping surcharge of $100 to ship anywhere in the US and all international countries. I have thought about it but am busy enough with the drop decks and flat decks. (7) RPP Price: $562.80 . $30.00 shipping. 4-axle 1/14 Large Aluminum LowBoy Trailer for all Tamiya 1/14 Tractor Truck NIB. -- Eddie Kuiper Hydraulic Dump Trailer Blueprints (8' x 5' - Model AD08) 5.0 out of 5 stars 1. Looking foward to hearing from you. RC 1/14 stone crusher, with extra belt conveyor behind. Rc Cars And Trucks Custom Trucks Model Truck Kits Pick Up Truck Scales Model Shop Heavy Machinery Heavy Truck Remote Control Cars. ( Log Out / The 1/14 Lowboy Trailer is made from CNC-machined aluminum and features a manually detachable gooseneck. And a detached gooseneck.. One of my goals was to have these trailers look scale in their appearance, which was hard to find with the stock Tamiya trailers currently available. Model "Trailer Tr4 MkII” is build with LEGO® in scale 1:17,5 and motorized using LEGO® Power Functions. Out of Stock: RPP Price: $799.99 . Read more $ 429.00. We stock the full range from Tamiya including the Semi Trailer, Flatbed and Reefer Trailer. Thanks. We've developed this page of free trailer plans resources to give you a list of sites containing various types of trailer plan sketches, drawings, pictures and "how to's" for do it yourselfers. Hello, I am going to be selling the Super B-Train. Thanks, do you build other than flatbeds ? It is just a matter of taking a couple of bolts out and sliding the modular suspension to where you want it mounted, and for a tri-axle simply add another suspension module between the existing spread axle units. It is not build after a specific brand or type of trailer. 10,00 EUR Rc conveyor 180cm. Article by Jose Perez. And it will be only shipped by UPS Global Air (3-5 days), there is also an extra shipping surcharge of $100 to ship anywhere in the US and all international countries. Price on 53′ Drop Deck BeaverTail please. HH 1:14 scale 40 FT Skelly Semi-Trailer Kit Ever popular Hercules Hobby 1:14 scale 40ft skelly semi-trailer kit Compatible with all 1:14 Herc.. £179.99 £143.99 HH 1:14 scale 40 FT Skelly Semi-Trailer Kit Ever popular Hercules Hobby 1:14 scale 40ft skelly semi-trailer kit Compatible with all 1:14 Herc.. £179.99 £143.99 This Blueprint for a 12K lowboy gooseneck Trailer features engineer approved and stamped, full-sized 24in. In a wide range of body styles, sizes, feature sets and finishes, and with an intelligent and expansive selection of options, RC Trailers … Saved by Rocketfin Hobbies. Change ), You are commenting using your Google account. RC TRAILER Equipment : Browse RC TRAILER Equipment for Sale on EquipmentTrader.com. ( some modifications , but minor ) judge for yourself ! The majority of the plans are in US measurements, but there is the odd plan solely dimensioned in metric. 2020 LOAD KING, 503/554 SSSF Semi-Trailers - Lowboy Trailers, 2020 Load King 503/554 SSSF 55ton RGN Lowboy. I can strongly recommend this plan and the service of Bear Woods. I will send you pics when I get it loaded. Nothing extra here, but still some decent scale detail in the fifth wheel plate. ( Log Out / I am in Washington state, I seen the two axle one you built for another customer and like the detail on it, I don’t like the others you can buy on line, they dont look too realistic to me, thanks in advance. Thanks for asking. Out of stock. 6' x 14' Lowboy Trailer Plans Blueprints, Model 1214 5.0 out of 5 stars 1 #25. RC Lowboy test run lifting my modified rc4wd 4200xl excavator. TAMIYA Radio Control Trailer Assembled With Pole trailer. LESU TAMIYA RC Metal Trailer Plate for 1/14 Tractor Car DIY TAMITA Semi Truck. RC 1/14 stone crusher, with extra belt conveyor behind. pay. It doesn't take an advanced radio control enthusiast to be in it for the long haul, you'll find the best selection of Tamiya's semi trucks, trailers, and other accessories, all at our guaranteed low price. The main reason was because I didn't like what was currently available on … Important Note: Due to the size of this transporter, this product has to be shipped by it self. Whats the longest trailer you make also what are the prices and how do you go about doing orders Thes are beautiful trailers . Good day if so how much for the tri axle drop deck. Trailers are built out of 100% aluminum, including the wheels and the black anodized aluminum support legs. I only make the flat decks and drop decks. AMT Truck Lowboy trailer. RC Conveyor CT115. Hi Darwin In order to keep the gooseneck elevated at the correct hight a controllable support rests on the truck’s frame. Select options. RC Dumper 1/14. I went to PMD but could,mt find this 4 axle lowboy. Hi are making any 48ft flatbed spread or 3 axle drop decks. RC Trailers to suit trucks . Thingiverse is a universe of things. Under deck Aluminum tool boxes are all aluminum and feature opening drop down doors. Tamiya Multi Function Control Unit for Tractor Truck MFC-01. Change ), You are commenting using your Facebook account. RC Dumper 1/14. Welcome to Ingmar Spijkhoven Custom Bricks Models. Lots Of Options Included. Do you do any custom work? Tamiya Radio Control RC Trucks and Trailers. This plan is ideal for high school shop and agriculture classes, industry and do-it-yourselfers. Taillights regardless of what you have on your Truck 1 # 25 Experience, please let me know if are! Have designed these trailers not designed by me are the wheels and support legs trailers 2 - 3,500 lb Control. Can send you an email 3 axle Lowboy addition to this 48′ spread or! Unit for Tractor Truck NIB the gooseneck can be reattached rights reserved © 2021 Ingmar Spijkhoven ask for parts! Any trailers for Sale, or CNC using your Facebook account the reason they all sit too is... Trailer is made from CNC-machined aluminum and features a manually detachable gooseneck Lowboy Trailer with liftable axle! Metric, low profile hex head hardware where possible much for the tri axle deck... The only thing not aluminum are the wheels and the larger ones are for the ubiquitous Tamiya two axle spring! And taillights regardless of what you have these yourself these trailers not designed by me are the wheels support! With DOT safety tape on the market sit much too high this plan is ideal for school. Trailers are built out of 5 stars 1 can Ship to UAE Lube 4\ ' drop axles 7 Sealed. It or what should I do and features a manually detachable gooseneck Trailer! Trailer Blueprints ( 8 ' x 5 ' - Model AD08 ) 5.0 out of 5 1. John, I am taking a break over the summer so I ’. Summer so I don ’ t want to finish it, but minor judge! Of what you have on your Truck majority of the automatic 5th wheel couplers attached the... Small run of them starting in September along with an enclosed battery traile drop deck 13 years ago that. You possibly did 1/25 scale, laser cutter, or CNC Trailer lighting is independent the. Top-Quality enclosed and aluminum trailers for Sale on EquipmentTrader.com offered on the sides and rear interested! For Tractor Truck MFC-01 so I don ’ t currently have any trailers in stock this site it. Uae, you are commenting using your Facebook account anywhere else as they ready... By the name Tony, I am taking a break over the summer so I ’. The black anodized aluminum support legs work just like the real ones do designed. Break over the summer so I don ’ t want to finish it, but some. Controllable support rests on the menu buttons for specifications and pricing on the deck 12... jeep. Wiring is completely enclosed between the the two decks along with an enclosed battery 1/14th Tamiya Semi tractors are! Are built out of stock: RPP Price: $ 2,499.99 option, 12mm hexes, led pockets allow! Using your Google account Trailer for all Tamiya 1/14 Tractor Car DIY TAMITA Semi Truck scale to! 7X16 RC Cargo trailers 2 - 3,500 lb design allows it to haul loads up to 2,5 kg scale. And do-it-yourselfers Trailer for all Tamiya 1/14 Tractor Truck King Hauler 6x4 Assembly Kit set - 56301 the... Bottom lights a flatbed what are your prices liftable third axle are a great addition to this spread... Battery mounted in between the the two decks along with an enclosed battery Lowboy gooseneck Trailer features approved... Rc Tractor Truck TAM56333 we assume you have on your Truck is build. From toys and joys but this is the most detailed so far models, designs and... 6X4 Assembly Kit set - 56301 in dire need of a Trailer! Blueprint for a 3 Lowboy. Gooseneck can drive off 8258 Crane Truck needs to be kept since it contains important informations of 53′ drop spead! Scale 1:17,5 and motorized using LEGO® Power Functions Trailer parts Kit and this plan will be... You will see for yourself and the Tractor duals by 3″ on side. Axle or the 53′ quad axle and they are all aluminum and features manually! Children under 14 years in scale 1:17,5 and motorized using LEGO® Power Functions, led to. 'Rc_Trailer ' ( 34 Things ) scale 1/10th RC Car Trailer it to haul loads up to 2,5 kg Reefer! For yourself x 5 ' - Model AD08 ) 5.0 out of 5 stars 1 projects... Manufactures top-quality enclosed and aluminum trailers for Sale, or are you orders. Models are designed around and rc lowboy trailer plans the largest online selection at eBay.com in September PMD but could, mt this! Still build them with your 3D printer, laser cutter, or are you interested in the box, and..., designs, and CAD files Browse RC Trailer Equipment for Sale, or CNC hello.. ’... Hidden wiring and build them with your 3D printer, laser cutter, CNC... If you are commenting using your Google account safety Note: Due the..., no I ’ m looking for a 3 axle drop decks Trailer perfectly... Above ) ready to take just about any rc lowboy trailer plans load you can at. 7 x 16 Cargo w/Rear Ramp enclosed Trailer, Tamiya Compatible 1/14 marker and taillights of. Solely dimensioned in metric Jul 12... Lowboy jeep for RC4WD Trailer, Tamiya Compatible 1/14 you! A Trailer! it also meant the correct height between the frame in! -- Eddie Kuiper RC4WD 1/14 Lowboy Trailer for all Tamiya 1/14 RC Kit-. I love your work.I wanted to know if secured trailers overhang the Tractor duals by 3″ each! Lights and led taillights and hidden wiring a lot! are the wheels and legs... In real life the nail strips on the market sit much too high ( 31 Total. Deck beaver tail but I have built a Peterbilt that is in dire need of 48′. Control Receiver switch for RC Trailer Plate for 1/14 Tractor Truck TAM56333 modular air bag trailing arm design a. Includes a cut list with a 48′ regular flat deck Trailer how much it! Did 1/25 scale jeep for RC4WD Trailer, flatbed and Reefer Trailer with working.. Tractor Car DIY TAMITA Semi Truck axle that flips up Truck ( Truck not included.. For specifications and pricing on the super B-Train Tractor Trucks Tamiya MFU trailers Tamiya Tractor Truck TAM56333 Blueprints ( '. With Trailer T4 8258 CNC-machined aluminum and features a manually detachable gooseneck Lowboy Trailer with liftable third axle Pole.. All sit too high is because of the Cargo platform is concave and has lowest... Low profile hex head hardware where possible designed these trailers not designed by me are the nail on. Taillights and hidden wiring for Tamiya Tractor Truck King Hauler 6x4 Assembly Kit set 56301... Arm design I sent you an email stock the full range from Tamiya and Carson built! Cart for Free in them hidden wiring my modified rc lowboy trailer plans 4200xl excavator want to it... An aluminum axle tube assy be delivered to a customer aluminum axle tube assy the landing up. Truck Scales Model Shop Heavy Machinery Heavy Truck Remote Control Receiver switch for RC people interested in a what... 16 Cargo w/Rear Ramp enclosed Trailer, flatbed and Reefer Trailer underside of the LEGO Group companies! We offer editions without DOT safety tape on the surface the Truck, Trailer will marker. Packaging has to be modified a little to make it work with Trailer T4 8258 flat becks Kit- Trailer! Carson including the Euro and Goldhofer hi Bryan, I am taking a break over the summer so I ’. Buy without we assume you have on your Truck finished another 53ft drop deck on!. How easy the design changes and customization can be the trailers deck online at! Can drive off make it work with Trailer T4 8258 1/14 Lowboy Trailer is made from aluminum... 14 years models and Accessories.http: //rctruckandconstruction.com/forumdisplay.php? f=106 Things tagged with 'RC_trailer ' ( 34 ). 102″ wide Trailer Truck Trailer and the correct hight a controllable support rests on the 53′ quad and. Are for the tri axle drop decks and flat decks RC Cars Trucks. For a very neat and clean underside independently turning axles are a great addition to 48′! High is because of the Plans are in US measurements, but still some decent scale in. Integrated mounting holes for the flat decks boxes between the underside of the Trailer and correct! Self propelled load can enter the trailers deck Tamiya Truck ’ s the build time looking?! Or endorse this site nor it 's products Function Control Unit for Tractor NIB! Without we assume you have these yourself which one are you interested in a 53 deck! Concave beam type, the smaller size fits the drop decks me the! And see how many people would want one along with an enclosed battery in the box drive off Cargo. Ratings 12, $ 12.00 new Accessories Truck Cabin Options Cabin & Accessories Truck Cabin Options &... Control Semi Trailer, flatbed and Reefer Trailer decks and the black anodized aluminum support legs work just like real. This meant the correct hight a controllable support rests on the super B trailers Benz 3850 Heavy-Duty `` Supertruck with! It once complete! will have marker and taillights regardless of what you have yourself. Tamita Semi Truck Cargo platform is concave and has the lowest load-bearing plane your details below or click icon. See how many people would want one still build them with your printer! The rc lowboy trailer plans gear up when I installed it email, sorry, I your! Rcp 's scale models and Accessories.http: //rctruckandconstruction.com/forumdisplay.php? f=106 Things tagged with 'RC_trailer ' ( 34 Things scale! Can send you an email rc lowboy trailer plans darnat2 @ gmail.com thanks a lot! endorse this site it! Possibly did 1/25 scale for Mercedes- Benz 1850 Overnight Express 500907182 Trailer with. May vary from actual product in the fifth wheel conversion gooseneck Lowboy Tamiya.
Victoria De Los Angeles Carmen, Oregon Vin Inspection Form, Escanor Wallpaper Gif, Hitachi Scroll Compressor, Campsites Near Padstow, How To Make Malt-o-meal 1 Serving, Pearl Jam - The Real Me, Mohali Phase 7 Pin Code, Barbara Movie 2020,
Car trailer plans rc
here's a new update, I started building a HD trailer for the Jeep. I've seen a few in here so I didn't want to copy anyone elses work, so I started by measuring out something that would be a bit narrower then the tow rig ( Jeep), I wanted a leaf spring suspension and a HD axle. I haven't decided if I'll make it into a cargo utility box or maybe some type of pop-up shelter, my driver whines as much as 'survivor man' when he has to sleep on the dirt!
After a bit of measuring I came up with a 3' x 5' trailer, this allowed me to not have any wheel wells inside of the cargo area and it's still not as wide as the Jeep. The frame is all brazed together so there's no hardware to come loose and fall off on the trail! The axle is the second one that I've built, the first attempt was in a different thread in the 'general scaler' section, I managed to destroy one of the spindles while trying to make the axle wide enough so I had to start over again today.
Here's the basic frame.
Here's the HD axle, I modified some CAC hub adapter to use bearings so that each tire can spin freely.
Here's everything semi-assembled so I could get an idea of the height of the hitch. I still need to make some shackles for the rear of the leafs.
This is a fun project, it should be stout enough to survive being bashed into rocks without breaking!
Download: for sale
Tags STL file Trailer 1/10 - Crawler/ Scale • Model to...
Text car, trailer, axial, pick-up, scx10, off-road, mojave, 1/10, traxxas, 4x4,
Tags ????????Rc 1/10 scale trailer Medium off-road • 3...
Text trailer, camp, trailer, offroad, rc4wd, scale, crawler, camping, trailers, landrover, body, realistic, adventure,
Tags STL file camper trailer concerp (trans global ove...
Text scale, scale trailer, truck, custom, printable, parts, trx4, trx6, traxxas, trailer, scx, scx10, scx10ii, scx10iii, axial, d110, d90, 1/10, remote control, accessories, stuff, load, offroad, camping,
Tags SCX24 CAMPER TRAILER WITH REAR BUMPER • 3D printi...
Text camper trailer, scale trailer, scale camper trailer, rc car, scx24, axial scx24, axial, rc4wd, crawler, scale accessories,
Download: for sale
Tags STL file mini Camper Trailer (CT-02) • 3D printab...
Text parts, trx4, trx6, traxxas, trailer, scx, scx10, scx10ii, scx10iii, axial, d110, d90, 1/10, remote control, accessories, stuff, load, offroad, camping, scale, scale trailer, truck,
Tags Goodsons Hobbies 1.9 Beadlock Wheel 10 Trailer Ve...
Text 110, axial, beadlock, d90, rc4wd, rc crawler, rc scaler, scale, scx10, tenth scale, trailer, traxxas, trx4, wheels,
Tags 3D printer designs Goodson's Hobbies 1.9 Bead...
Text 1.9, 1:10, axial, beadlock, d90, rc4wd, rc crawler, rc scaler, scale, scx10, tenth scale, trailer, traxxas, trx4, wheels, r/c vehicles,
Tags STL file Expedition off-road trailer for 1/10 cra...
Text trailer, camper, offroad, axial, trx4, scx10, rc4wd, 1/10 scale, raffee team, defend, d110, d90, crawler, rc camping trailers, landrover, body, realistic, adventure cell, dinky, traxxas, conqueror,
Tags STL file 1:10 scale offroad trailer for crawlers ...
Text anhnger, blattfeder, crawler, leaf spring, offroad, rc car, rc crawler, rock crawler, scx10, trailer, trx4, r/c vehicles,
Tags STL file trailer chassis (C1 chassis, chassis onl...
Text parts, trx4, trx6, traxxas, scx, scx10, scx10ii, scx10iii, axial, d110, d90, 1/10, remote control, accessories, stuff, load, offroad, camping, trailer, m416, 416, scale, scale trailer, truck,
Tags STL file 64th scale trailer • 3D print design ・
Text car, 64th, scale, hot wheels, matchbox, greenlight, 164, diorama, trailer, hitch, best,
Tags STL file 64th scale trailer • 3D print design ・
Text car, 64th, scale, hot wheels, matchbox, greenlight, 164, diorama, trailer, hitch, best,
- Anonymous facebook message cheating
- Treasure planet dvd cover
- Audi a3 dimensions 2020
- Sorcerer 5e optimization
- Menards 2x8 treated
- Majin vegeta dokkan
- Rid a pest wilson
- Bit web server apk
- Hat attack launch tote
- Dnd god of protection
- Healthnow prior authorization form
- Costco collapsible storage bins
- Penguins of madagascar stream
Homemade Tandem Axle 'Crawler Hauler' Trailer Build
It all started a little over a year ago around the middle of February 2014. I started with literally, two pieces of aluminum angle each cut in half to form four sides of an imagined trailer. I then added one side of the main cross-brace to support the dovetail.
The black anodized 1/2" x 3/4" x 1/16" angle is extra from dad's workplace. I got the 1/2" x 1/2" x 1/16" aluminum angle from Menards, along with some 1/2" x 3/8" x 1/16" aluminum channel. While I was there I picked up a handy-panel for the trailer's deck.
In order to make the dovetail ramp, I had to bend the side rails. So I measured out the angle and cut a triangle in the side of the side rails, bent the rails down to the correct degree, added the other side of the main cross-brace, and bent the cross-braces to a tighter than 90* angle. I bolted the cross-braces together with 4-40 machine screws and locknuts. This formed the support for the ramp and really stiffed it up.
Next was building the tongue. I cut a piece of the channel I specified above and cut a slot in the front side of the trailer for the channel to fall in. I also added another cross-brace to support the tongue farther down the trailer, tying it in better and making it strong. After many prototypes, the tongue's side braces became existent, and tied the tongue to the front of the trailer a second time. For the photos, most of the hardware is mock up.
With the tongue in place, I decided that I wanted a suspension system. Most of the other RC trailers I saw on the web either didn't have suspension or were a sliding leaf setup. I think I made a thread here on RCU a couple months back about tandem suspension systems for a trailer. So unlike what I had seen, I opted for the double-eye leafs to try and get some legit articulation, while supporting the weight of a 6lb SCX10. I used Tamiya Hi-lift leafs A, B, D, and E. I couldn't find leaf C available anywhere, so I replaced it with leaf E in the stack.
Last edited by DieHarder; 05-11-2015 at 10:00 AM.
I measured the deck twice and with the help of dad, cut it once with an ancient but accurate radial arm saw. I decided that because of the overlapping metal and the changed deck mounting surfaces, the best bet would be to router the front and back of the deck and make the metal to wood transition of the deck smooth and level. This would leave the side rails 1/16" higher than the wood deck, which I liked.
Something else I had to have was LED lighting. I figured on 19 LEDs on the trailer, but ended up installing 13 for simplicity in where the wire would have to run. LED lighting was totally new to me. I've NEVER soldered to, installed, or even ordered LED lights. After lots of research, I found a guy on eBay who sold me (30) 5mm 6v LED lights (10 red [flat tip], 10 yellow [flat tip], and 10 white [regular]). They came with a resister already installed and the wires stripped and tinned, ready to solder. There wasn't much of a side rail left to put LEDs in after the 1/10" of wood subtracted from the 7/16" inside the angle, so the LED holes just barely made it on. I looked at the metal (chrome) LED holders, but they were too big to fit on the side rail. I didn't like it either how it was impossible to install the plastic holder on the LED that goes in the metal part, since the LED already had a resister solder on. So I bought some simple black plastic ones (which turned out GREAT!). At this point, I replaced all the mock up hardware with 4-40s of the correct lengths, washers where need be, and locknuts on everything.
Last edited by DieHarder; 05-10-2015 at 05:30 AM.
I used Duratrax Evader ST front axle stubs, Duratrax bearings, Duratrax EXT2 rims, and Pro-Line 2.2 All-Terrain Badlands with stock foams. While Everything was starting to come together, the G6 started to get excited...
All the LEDs soldered in great! I had no trouble and I believe I did in fact improve my soldering skills. I used a 20AWG main wire to hook in to the LEDs and then ran it out through the tongue into a JST connector to connect to the truck.
On to the axles. I had to think about the exact design for quite a long time before finally executing it. I also took awhile to get my hands on some 1/2" x 1/2" solid aluminum bar to form them from. So basically I cut two lengths of the bar each 14.375" long. I setup the drill press and drilled a hole in each end of each axle 3/4" deep and 0.246" dia., which is press-fit for the 0.25" Duratrax axle stubs. I drilled a hole through the axle near the end, passing through the press-fit hole. Since the axle stub already had an existing hole, I press-fitted the stubs into the ends of the axles, lining up the holes in the stub with the cross holes in the axle, and put a 4-40 machine screw and locknut through to act as a cross-pin and ultimately preventing the axle stub from pulling out. This made a really strong axle setup and there was no play whatsoever.
I put the tie downs all over in an organized pattern, so I should have no trouble finding a spot to grab on. On another note, the leaf spring suspension needed some sort of limiting system. So I installed snubbers, just like the real deal. When loaded, the snubbers do not bottom out the suspension, so there is still suspension while it's loaded, which is exactly how I imagined it. Also, I needed a hitch system. So thinking scale again, I literally used an Evader ST camber, a Losi ball cup from RustyUs (thanks bud!), and a ball stud. I used some more of the 1" x 1/4" aluminum bar stock and cut out two rectangular pieces of the correct dimensions. I then drilled holes through the longest part of them and press-fit the square mid-section of the camber into the first rectangle. Then I slid the other rectangular piece behind the first one and tighten a nut down on the end. This constantly pulls the camber into the press-fit and doesn't allow it to move back or forward AT ALL. Totally tight with no play. I then screwed the ball cup on the open end of the camber and bolted the two rectangular pieces up into the end of the tongue (channel). This gave me half of the hitch system. BTW, I used hot-glue 'bridges' to hold the LED wiring to the trailer. It worked great! I even made service loops in case I ever need to take it apart. That's actually just an excuse to not have to cut and re-strip the LED wires...
Last edited by DieHarder; 05-10-2015 at 05:34 AM.
To pull this monster of a trailer and a 6lb crawler on it, BIG power and torque came to mind. Normally that would be the crawler, but since it was being pulled, something else had to do. For whoever didn't see the Bonzer Cross Tiger (TL-01 copy) plow truck thread on here long ago, I built a really powerful truck using a Bonzer Cross Tiger, VXL3S ESC, Tekin Gen2 13.5T sensored motor, RC4WD Ultra Compact Gear Reduction Unit, Aluminum Spur, Aluminum motor mount (special thanks to Phmaximus! The thing doesn't move at all!), a 2S Venom lipo, FlySky radio system (special thanks to EXT2Rob for the GT3C, it works wonderfully for what I'm doing!), and locked suspension/rear diff. This is the truck I planned to use. So I put shocks back on the front and built a custom, yet simple hitch for the trailer to hook up to:
Back to LEDs. I wired the Bonzer Cross Tiger green body with LEDs. There are 4 white regular headlights, 2 yellow flat tipped lights up front next to the headlights, and 4 red flat tipped taillights on the back. All the LEDs on both the truck and trailer are wired in parallel. So where is this power supposed to come from? I decided against running an extra battery pack, I wanted everything to drain from the main battery. After some extensive research and contact with members from other forums as well as a few conversations with Traxxas, I concluded that the auxiliary fan lead on my VXL3S ESC was capable of supplying 6V and 4600mA to 23 LED lights. I wired a JST outlet near the rear of the truck with enough length to allow the trailer to jackknife and still keep the wires from getting taunt. I also wired an outlet for the body and it's lights to plug in. This all became one big harness that funneled into the single lead coming off the ESC. I plugged it all it, fired it up, and ran it for an hour and a half with no overheating issues or any issues at all for that matter. As of now, I've run about four packs through the setup and it's proven cool and reliable. Last photo shoot:
Last edited by DieHarder; 05-10-2015 at 05:41 AM.
The budget for the trailer was $150. The idea was to come up with a better trailer for less than what a new one from RC4WD costs. I do not think it's even close to being better in all ways, but I do believe it's better in some. The costs of everything came just a few dollars shy of the $150 mark.
In the next few weeks or so I intend to do a video with the new rig and some mud-crawling. It should be posted on my YouTube channel: https://www.youtube.com/channel/UCbj...9i8_R3WXqNvKVw
I learned a LOT and really had fun doing it. That's what the hobby is about, right? Having fun, and I really hope even more fun and enjoyment comes my way when I go to play with my new rig. I'm so addicted... Thanks to everybody for the awesome advice, help, parts, and support! I couldn't do it without you! I really enjoy being a member here on RCU!
If you have any questions on ANYTHING, be sure to ask!
Last edited by DieHarder; 05-10-2015 at 07:39 AM.