Tp link modem reset

Tp link modem reset DEFAULT

How to reset TP-Link router to factory defaults

Notice:

1.   A hard reset will restore your device to factory default settings. You should reconfigure the device from scratch or you can load the configuration file you have backed up before the reset.

2.    For these models, we could see WPS/RESET button on the rear panel/the Front Panel. To use WPS function, please push the button for less than 5 seconds, and then the WPS LED will flash; to reset the router, please push the button for at least 10 seconds.

 

There are two methods to reset to the Router's factory defaults:

 

Method 1 Hard reset/By pressing the RESET button

 

With the Router powered on, press and hold the WPS/RESET button (more than 10 seconds) until the SYS LED becomes quick-flash from slow-flash. Then release the button and wait the Router to reboot to its factory default settings.

 

Method 2 :By Router's Web Interface

 

 

Note:

1. Make certain that the router is powered on before it restarts completely.

 

2. The default IP address/domain name can be found at the bottom label of the product, and the default login username and password both are admin (all lower case).

 

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

 

 

Is this faq useful?
Your feedback helps improve this site.

Any other feedback?

How can we improve it?

Thank you
We appreciate your feedback.
Click here to contact TP-Link technical support.

Sours: https://www.tp-link.com/id/support/faq//

How to reset TP-Link router to factory defaults

Notice:

1.   A hard reset will restore your device to factory default settings. You should reconfigure the device from scratch or you can load the configuration file you have backed up before the reset.

2.    For these models, we could see WPS/RESET button on the rear panel/the Front Panel. To use WPS function, please push the button for less than 5 seconds, and then the WPS LED will flash; to reset the router, please push the button for at least 10 seconds.

 

There are two methods to reset to the Router's factory defaults:

 

Method 1 Hard reset/By pressing the RESET button

 

With the Router powered on, press and hold the WPS/RESET button (more than 10 seconds) until the SYS LED becomes quick-flash from slow-flash. Then release the button and wait the Router to reboot to its factory default settings.

 

Method 2 :By Router's Web Interface

 

 

Note:

1. Make certain that the router is powered on before it restarts completely.

 

2. The default IP address/domain name can be found at the bottom label of the product, and the default login username and password both are admin (all lower case).

 

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

 

 

¿Es útil esta faq?
Sus comentarios nos ayudan a mejorar este sitio.

¿Algún otro comentario?

¿Cómo podemos mejorar?

Gracias
Agradecemos sus comentarios.
Haga clic aquí para comunicarse con el soporte técnico de TP-Link.

Sours: https://www.tp-link.com/latam/support/faq//
  1. Next of kin letter to bank
  2. Winter soldier magic band
  3. Dramatic 2 minute monologues
  4. Gmc terrain maintenance cost

Cara Seting Dan Reset Modem Speedy TP-Link TD-WN

Seperti yang sudah saya janjikan pada artikel sebelumnya, kali ini saya akan berbagi tutorial cara seting maupun cara reset modem Speedy TP-Link TD-WN. Seharusnya sebagai pemilik modem Speedy, anda diharuskan bisa mengatasi masalah kalau hanya cuma seting modem, dalam arti seting username dan password modem. Jadi jika suatu saat modem anda error atau tidak bisa konek ke internet maka anda tidak perlu susah payah mendatangkan teknisi Speedy ke rumah jika kerusakan hanya terletak pada setingan yang berubah. Belum tentu juga teknisi Speedy bisa langsuing datang, paling juga besoknya baru datang.

Trus pertanyaannya, kenapa kok sampai modem diseting ulang, padahal kan sebelumnya sudah disetingkan oleh teknisi Speedy? Biasanya modem perlu diseting ulang setelah kita mereset modem. Nah setahu saya, reset modem terjadi ada 3 penyebab (kalau kurang mohon ditambahkan ya).

1. Pada waktu listrik tiba-tiba mati, kemudian setelah listrik nyala kembali tiba-tiba modem sudah tidak bisa konek internet. Sudah dihidupkan matikan tetap saja tidak mau konek. Ini saya sudah pernah mengalaminya sendiri. Nah setelah saya lihat disetingannya ternyata username dan password Speedy nya sudah tidak ada alias menghilang. Kok bisa? Kesimpulan saya sih mungkin listrik mati mendadak bisa juga menyebabkan modem TP-Link TD-WN ini bisa mereset sendiri. Jika anda memiliki masalah yang sama seperti saya, setelah listrik mati modem Speedy tidak bisa konek internet berarti modem anda mereset sendiri.

2. Kemudian reset modem terjadi pada saat modem tidak bisa konek ke internet (bukan karena listrik mati), melainkan tiba-tiba saja modem tidak mau konek ke internet. Biasanya jalan yang ditempuh adalah mereset modem. Setelah reset modem otomatis kita harus seting kembali dengan memasukkan username dan password Speedy kita kan. Kebanyakan setelah proses reset ini maka modem akan berjalan normal lagi, bisa konek ke internet.

3. Reset modem terjadi bila saja kita lupa akan IP modem. Kalau lupa IP modem otomatis kan tidak bisa masuk ke admin panel modem. Ini biasa terjadi pada modem yang sebelumnya sudah diubah IP address nya. Biasanya dilakukan pada mereka yang menggunakan router, sehingga IP modem disesuaikan dengan IP public router. Bisa saja kan suatu saat lupa IP address, salah satu cara ya direset tadi agar IP modem kembali ke IP default modem. Atau bisa juga anda hafal IP modem tetapi lupa password admin panel, nah sama saja tidak bisa masuk ke admin panel modem. Saran saya sih sebaiknya IP modem, username maupun password admin jangan sampai diubah, biarkan secara default saja.

Sekarang bagaimana cara reset modem Speedy TP-Link TD-WN ini? Di bagian belakang kan ada port-port buat LAN, ADSL, adaptor, dan juga ada tombol reset yang letaknya agak ke dalam.

Jika anda ingin merest, anda memerlukan alat yang runcing (misal pulpen) untuk menusuk tombol reset. Dalam keadaan modem Speedy masih hidup, tekan tombol reset menggunakan pulpen selama kurang lebih detik, kemudian lepaskan. Tunggu hingga lampu modem nyala semua.

Setelah ini baru kita masuk ke panel admin modem untuk melakukan seting ulang username dan password, caranya adalah sebagai berikut.

1. Hubungkan modem Speedy ke komputer menggunakan kabel LAN. Buka browser Mozilla Firefox atau Google Chrome, ketikkan di address bar IP default modem TP-Link TD-WN yaitu kemudian tekan enter maka akan muncul jendela untuk memasukkan username dan password, default username dan password nya adalah admin.

2. Setelah masuk ke admin panel, pilih tab Quick Start >> Run Wizard

3. Jendela selanjutnya klik Next

4. Pilih time zone anda, misal Jakarta, kemudian klik Next

5. Pilih ISP connection type. Jika modem anda langsung terhubung ke komputer (sebagai dial up) maka pilih PPPoE/PPPoA. Tapi jika anda menggunakan router atau mikrotik maka pilih Bridge mode. Tapi di sini saya contohkan modem langsung colok ke komputer sebagai dial up jadi pilih PPPoE/PPPoA. Klik Next

6. Setelah itu masukkan username dan password Speedy anda, yang lainnya biarkan secara default. Klik Next

7. Jendela berikutnya adalah seting Wireless atau Wifi, apakah anda ingin mengaktifkan Wifi atau tidak tinggal pilih Activated atau Deactivated. SSID adalah nama Wifi yang akan muncul nanti sedangkan Pre-shared Key adalah password Wifi. Yang lain biarkan default kemudian klik Next.

8. Sampai di sini seting modem Speedy TP-Link TD-WN sudah selesai

Pastikan semua lampu modem nyala kecuali lampu tanda gembok.

Seting modem Speedy TP-Link TD-WN telah selesai, silahkan anda browsing seperti biasa. Jika modem masih juga tidak mau konek ke internet pastikan username dan password Speedy yang anda masukkan sudah benar. Kalu masih saja tidak mau konek berarti gangguan terjadi pada pusat, hubungi kantor Telkom terdekat.

Sours: https://teknikit.com//12/cara-seting-modem-speedy-tp-link-td-wn.html

How to reset TP-Link ADSL modem router to factory defaults

 Notice:

If you reset the device, the device will return to factory defaults, you will lose all your settings. Do not perform a hard reset unless you have backed up your settings or you can do the configuration again.

 

There are two methods to reset to the ADSL's factory defaults:

 

Method 1 Hard reset/By pressing the RESET button

With the Router powered on, directly press and hold the reset button on the rear panel with a pin for approximately 6 to 10 seconds, Release the reset button and wait for the device to reboot automatically to its factory default settings.

 

Method 2 By ADSL modem Router's Web-based Utility (management page)

 

If you are on the management page, you could use the Factory Defaults function.

 

For ADSL modem router (Broadcom solution)

Please go to Management -> Restore Default” page, then check on theRestore Default Settings and wait the Router to reboot to its factory default settings.

 

For ADSL modem router (TC solution)

Please go to Maintenance -> SysRestart” page, then check on the Factory Default Settings, click on restart button and wait the Router to reboot to its factory default settings.

 

Note:

1. Make certain that the router is powered on before it restarts completely.

2. The default IP address is , and the default login username and password both are admin (all lower case).

3.  Ensure that the IP address of your computer is in the same subnet with the device. It means that your computer has an IP address X (X is in range of 2~), and the subnet mask is

Is this faq useful?
Your feedback helps improve this site.

Any other feedback?

How can we improve it?

Thank you
We appreciate your feedback.
Click here to contact TP-Link technical support.

Sours: https://www.tp-link.com/ae/support/faq//

Modem reset link tp

How to reset TP Link modem

Well, I am pleased to inform you that you have come to the right place, at a time that could not have been better. In fact, I intend to provide you with all the necessary information below, explaining in detail how to return the TP-Link modem to you in factory settings

First, I will show you how to enter your admin panel and explain how save (if necessary) your personal settings and how to perform a hard reset of the device. Do not be afraid, you do not need it: these are extremely simple procedures that can also be applied by those who, like you, are not so practical with the technology.

How to reset TP Link modem step by step

Access the configuration panel

The first thing you need to do to reset your TP-Link modem (or router) is log in to the configuration panel.

If you've never heard of it, it's the device management interface that, through any browser, allows you to configure it in all its aspects with just a few clicks, using a kind of purpose-built 'website'.

So, first of all, start the navigation program of your choice (eg. GoogleChrome, safari o Microsoft Edge ), and connect to the address o

If everything went in the right direction, you should come face-to-face with the login page of the configuration panel, where you should be able to log in by entering username and password combinations admin / admin o admin / password.

Once you are logged in, you should see the summary page about the modem status, with a series of menus and buttons to access the different configuration sections.

If you are unable to access the configuration panel in any way, as it is locked or returns 'strange' errors, I recommend that you turn off the router with the physical button ON / OFF (generally placed in the back device where all connection ports reside) and turn it back on after a few seconds.

When this solution does not allow you to enter the administration of the router, you must reset the device using the appropriate physical button reset, which I will tell you about in the corresponding section of this guide.

Make a backup of your configuration

As is easy to understand, the modem reset operation has the direct consequence of the loss of all custom settings (for example ADSL / fiber settings, open ports and so on) and resetting the device to factory state.

So if you are going to reset TP Link modem to resolve an unforeseen situation, I advise you to make a copy of all the changes made over time in its basic configuration.

Once you have entered the modem / router configuration panel, click on the tab Advanced / Advanced placed on top, then press the button System tools placed at the bottom left and choose the item Backup and restore / Backup and restore.

At this point, all you have to do is press the button copy  which is in the center of the screen and decides, with the help of the proposed panel, where to save the file that contains the configuration of your router.

Once the device has been rebooted, you can "load" your personal settings again in a very simple way: go back to Advanced> System Tools> Backup and Restore, Press the button Surf, choose the path of the previously created file and once the selection is complete press the button Restore to reconfigure the parameters saved in the file.

note - If you have decided to reset the router due to malfunction after making some changes, I do not recommend you to backup and restore your personal settings as after you may encounter the same problem (maybe caused by setting incorrect) and you are at the starting point.

Reset TP Link Modem

Sometimes minor modem / router breakdowns (e.g. lack of access to Internet, slow communication, "disappearance" of the Wi-Fi network, etc.) can also be solved with a simple reboot, without therefore resorting to a "drastic" solution such as restoring factory settings.

So if you suddenly come across a problem similar to the ones I listed a while back, I recommend that you restart the TP-Link device first and check if the problem spontaneously resolves.

First, go to the modem / router configuration panel as I explained in the previous sections, then click the button Restart / Restart found at the top right and confirms the desire to continue pressing the button Yes, Ok. The restart operation should take a few minutes.

If the button in question is not available, you must go to the section System tools, by pressing the item of the same name located in the left navigation bar, click on the option Reiniciar that appears immediately below and finally presses the buttons Reiniciar y to accept to start the procedure.

If, for some reason, you cannot reboot the modem / router using the configuration panel, you can use the "physical" button ON / OFF To complete this operation: This is usually a button (or a switch) located on the back of the device, near the input of the power cord.

So all you have to do is press the off button (or move the switch to OFF), check that the device is actually turned off and wait approximately 60/2 Before turning it on again, press the same button / switch again - it may take a few minutes for the router to fully reboot.

If the power button is broken or, for some reason, inaccessible, you can "reboot" the device by disconnecting it directly from the power source and reconnecting it, this time again, after about a minute.

Reset TP Link Modem

If you have read this far, it means that you are absolutely willing to reset TP Link modem.

To get started, therefore, go to the device admin panel as I showed you earlier, click on the tab Advanced / Advanced located at the top (if applicable) and access the section System Tools / System Tools> Backup and Restore / Backup and Restore.

At this point, all you have to do is press the button Restore factory defaults and, very aware that the operation will remove all settings router staff click the button yes to proceed with the operation, which could take a few minutes. When finished, the router will reset to factory settings.

note: on some TP-Link modems / routers, the reset button may be in the section System Tools> Factory Defaults.

If you can't access the router's configuration panel, you can proceed with a full reset using the reset button located on the device. First get a pointy object (like a needle or toothpick), then identify the key reset on the back of the modem / router (usually located in the immediate vicinity of the Ethernet ports), press it using the pointed object above, hold it down for about 10 seconds and, after this time, release it.

When the button is released, all the LEDs on the router should light up simultaneously and then immediately go off - this indicates the start of the factory reset procedure (which should take a few minutes).

Some models of TP-Link routers have the "combo" button WPS / Reset, which can be used both to pair via WPS technology and to restore the device: also in this case, you must follow the instructions that I have given you a bit, however, extend the time of pressing the button at least 15 seconds.

Sours: https://paradacreativa.es/en/como-restablecer-el-modem-tp-link/
TP-LİNK modem reset atmaq smart online

Because they were true. He fell in love with her ass immediately, at first sight, when he saw this ass live, so to speak, in all its. Glory. I saw - and fell in love without memory. It was like this.

You will also like:

Maybe she was not tight, but he moaned shrilly and for a long time. Only I alone did not have time to finish while they were convulsing, which is interesting that the drug addict has never even protruded a member. It looks like he is not standing at all. The redhead jumped off the table and his penis began to fall off, went up to my ass and pulled out.



340 341 342 343 344